819060

Kress KG756E Manual

14
Zoom out
Zoom in
Previous page
1/20
Next page
14
Cordless Lawn Mower KG756E KG756E.X
Insert the safety key before installing the battery pack.
NOTE: Depress the battery release button to release
battery pack from your tool. After recharging, insert
the battery pack into tool’s battery port until you hear
a “click”. A simple push and slight pressure will be
sufcient.
OPERATION
Starting and Stopping (See Fig. G1, G2)
Press the Safety lock-out button, then the push
Operating bail to start. Release the operating bail to
stop.
NOTE: For starting, press both the Safety lock-out
button and the Operating bail at the same time.
MULCHING MOWING TIPS
While mulching, your new mower is designed to cut
the grass clippings into small pieces and distribute
them back into the lawn. Under normal conditions,
the mulched grass will biodegrade quickly and
deliver nutrients to the lawn. Please review the
following recommendations for optimum mulching
performance.
1) Avoid mowing when the grass is wet from rain or
dew. Wet grass may form clumps which interfere
with the mulching action and reduce the runtime.
The best time to mow the grass is in the late
afternoon when the grass is dry and the newly cut
area will not be exposed to direct sunlight.
2) For the best mulching performance, set the
cutting height to remove about one third of the
grass blade length, ideally no more than 40mm
at one time. If the lawn is overgrown, it may
be necessary to increase the cutting height to
reduce the pushing effort and prevent overloading
the motor. For extremely heavy mulching, it is
advisable to rst cut at a high cut height setting,
and then re-cut to the nal cut height. Otherwise,
make narrower cuts and mow slowly.
3) For the best performance, keep the mower
housing free of built-up grass. From time to time
turn off mower and wait for the blades to come
to a complete stop. Then unplug the safety key,
remove the batteries and turn mower on its side.
Using an object such as a stick, wipe out any
accumulation of grass around the blade area. Be
careful of the sharp edges of the blade. Ensure
to clean the blade area often when cutting wet
or new grass and every time after the machine is
used.
4) Certain types of grass or grass conditions may
require that an area be mulched a second time
to fully disperse the grass throughout the lawn.
If cutting a second time, it is advisable to cut
perpendicular (across) the rst cut pattern. DO
NOT CHANGE CUT PATTERN IN ANY WAY THAT
WOULD CAUSE MOWING DOWN A HILL.
5) Change your cutting pattern from week to week.
This will help prevent matting and graining of the
lawn.
6) Do not mow on a slope that has an angle of
greater than 15
o
.
CUTTING AREA
The cutting area can be affected by several factors,
such as cutting height, lawn humidity, grass length
and density. Besides, starting and stopping the
mower too many times during operation will reduce
the cutting area.
It is ideal for mowing up to 1200m² lot sizes.
TIPS:
1) It is recommended to mow your lawn more
frequently, walk at normal pace, and not to start/
stop the mower too often during operation.
2) For best performance, please ensure use two
fully charged battery packs at the same time and
always cut off 1/3 or less of the grass height.
3) Walk slowly when cutting long grass, so as to
have more effective cutting and properly discharge
the clippings.
4) Avoid cutting wet grass, otherwise it will stick
to the underside of the deck and the clippings
cannot be collected or discharged properly.
5) A higher cutting height shall be applied to new or
thick grass and it will extend the battery duration.
Adjusting the cutting height (See Fig. H)
Press and hold Cutting-height adjustment lever.
Adjust the cutting height up and down.
WARNING! Stop, release operating bail and
wait until the motor stops before adjusting
height. The blades continue to rotate after the
machine is switched off, a rotating blade can cause
injury. Do not touch rotating blades.
Opening the LED headlight (See Fig. I)
Press the switch button for LED headlight.
AFTER OPERATION:
STORAGE (See Fig. J1, J2)
Stop the mower and always unplug the safety key
and remove the batteries. Clean the exterior of the
machine thoroughly using a soft brush and cloth. Do
not use water, solvents or polishes. Remove all grass
and debris, especially from the ventilation slots.
Turn the machine on its side and clean the blade area.
If grass cuttings are compacted in the blade area,
remove with a wooden or plastic implement.
Store the machine in a dry place. Do not place other
objects on top of the machine.
To aid storage, Press and hold quick-release button
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kress KG756E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kress KG756E in the language / languages: English as an attachment in your email.

The manual is 10.35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info