390125
8
Zoom out
Zoom in
Previous page
1/56
Next page
8 English 900 HEX/2
The eccentric disc sander is intended for sanding and
polishing wood, plastic and metal materials as well as
painted, flat and rounded surfaces.
Before operating the machine, please read through
the operating instructions completely, follow the
Safety Instructions in this manual as well as the gen-
eral Safety Instructions for Power Tools in the
accompanying booklet.
Important instructions, which should be read
before starting operation, and which we strongly
recommend observing:
If the mains cable is damaged while working, pull
the mains plug immediately.
Never work with a damaged mains cable.
Wear protective glasses, hearing protection, pro-
tective gloves and sturdy shoes.
The dust that is produced while working is detri-
mental to health. Use dust extraction and wear a
dust mask.
The machine can be used only for dry sanding.
Do not work with materials containing asbestos.
Do not carry the machine by the cable.
The mains receptacles in the working area must
be protected by a residual current circuit breaker
(RC).
Do not drill holes into the housing to label the
machine. The protective insulation will be bridged.
Please use self-adhesive labels.
Measured values determined according to
EN 50 144.
Sound pressure level: 78 dB (A)
Sound power level: 91 dB (A)
Work place emission value: 81 dB (A).
For operation, noise protection measures are
required.
The acceleration measured is usually less
than 2.5 m/s
2
.
1 Lugs
2 Spacer
3 Locking grip
4 Screw of curved handle
5 Curved handle
6 Switching ring
7 Locking switch
8 Ventilation slots
9 Latch for mains cable module
10 Speed selection knob
11 Recess
12 Rubber backing pad
13 Rubber head
14 Lock
15 Backing pad carrier plate
16 Sanding sheet
17 Torx screws
18 Rubber seal
Accessories illustrated or described are not always
included as standard delivery items.
1 Application
2
Safety Instructions and
Accident Prevention
3 Noise/vibration information
4 Technical Data
Eccentric disc sander 900 HEX/2
Article number 06 05 1101
Input power 900 W
Output power 495 W
No-load speed 23255500 RPM
No-load oscillations rate 4650 11000 RPM
Backing pad Ø 150 mm
Eccentric amplitude Ø 7 mm
Weight approx. 2.2 kg
Safety class II/
5 Illustration
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kress 900 hex at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kress 900 hex in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info