508068
21
Zoom out
Zoom in
Previous page
1/184
Next page
Tools and accessories English 21
1400HKS,1400DS-EN / 1106
EN
Observe the specified conditions of use for the
saw: cutting wood or wood-like materials with
saw blades only. Grinding discs must not be
used.
Do not cut materials containing asbestos!
Sockets outdoors must be protected by
residual-current circuit breakers (FI-).
Never drill into the housing to mark the saw.
The protective insulation would be bridged.
Use stickers.
Motor
The strong universal motor has sufficient power
reserves. It is cooled by an extra-large fan unit.
Allow the motor to cool down at no-load
speed!
Work only with good, sharp saw blades. This
helps prevents the motor overheating!
5. Tools and accessories
Saw blades
Ø 190 mm, bore hole Ø 20 mm
hardened metal tipped, alternating tooth
Wood and wood-like materials, medium quality:
Number of teeth 14
Wood, wood-like materials and plastics, very
suitable for coated boards, clean-cutting:
Number of teeth 48
Sawing with the guide rail
The guide rail (25) helps you to perform straight
cuts. The adhesive coating prevents the guide rail
from slipping and protects the surface of the work-
piece. The coating on the guide rail allows the saw
to glide smoothly.
To saw at right angles, you can place the saw
directly on the guide rail (25). Attach the guide rail
(25) using suitable clamping devices, e.g. vices (27)
to the workpiece so that the narrow leg of the
guide rail (25) points towards the saw blade.
The guide rail (25) must not protrude beyond
the side of the workpiece which is to be sawn.
The guide rail adapter (28) is required for performing
bevel cuts with the guide rail (25). The guide rail
adapter (28) is fitted as shown in Figure 3.
Dust/chip suction
Dust from materials such as paints containing
lead, some types of wood, minerals and metal can
be health hazards. Contact with or breathing in such
dust can trigger allergic reactions and/or breathing
problems for the user and other persons in the
vicinity.
Certain dusts such as oak or beech dust are
classed as carcinogenic, especially in combination
with wood treatment additives (chromate, wood
preservatives).
We recommend the use of a dust extraction
device.
Ensure that the workplace is well ventilated.
Comply with the relevant regulations in place in
your country for the materials to be processed.
Use as a bench saw
The saw may only be used as a bench saw with
saw benches explicitly approved by their manu-
facturer for use with this KRESS saw.
Do not use accessories made by other manufac-
turers, as these are not tested by KRESS.
Using such accessories can be dangerous.
To prevent injury and damage, use only the
accessories and parts recommended by KRESS.
-NOTE-
Prolonged heavy duty may overheat the motor!
-NOTE-
Only operate the saw with a functioning dust/chip
extractor. The extractor must meet the require-
ments of the "Safety regulations for extraction and
removal of wood dust and shavings" (ZH1/139).
The extractor must ensure a minimum air speed of
20 m/s at the suction neck.
Special accessories
36727_a_BA_Handkreissäge_1400HKS.book Seite 21 Donnerstag, 20. Oktober 2011 9:25 09
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kress 1400 HKS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kress 1400 HKS in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 13,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info