508042
10
Zoom out
Zoom in
Previous page
1/63
Next page
10
English 133 MDX
1
ON/OFF switch
2
Rotational direction switch
3
Mechanical two-speed selector
4
Torque adjustment ring
5
Battery locking
6
Battery
7
Battery charging unit
Accessories illustrated or described are not always
included as standard delivery items.
Measured values determined according to
EN 50 260.
Sound pressure level: 63 + 3 dB (A)
Sound power level: 76 + 3 dB (A)
Work place emission value: 66 + 3 dB (A).
For operation, noise protection measures are
required.
The acceleration measured is usually less
than 2.5 m/s
2
.
The rated voltage of the battery must agree with the
value on the machine.
The batteries are not charged. They therefore have
to be charged before use.
A new battery develops full power only after it has
been subjected to approx. 5 charging and dis-
charging cycles.
The maximum service life of the batteries is
attained if you charge these at an ambient temper-
ature of between +5 °C and max. +45 °C.
If the battery is not within the permitted loading
temperature range (approx. +5 °C and +45 °C)
charging time is extended by the cooling or warm-
up time.
Important! Batteries will discharge even if the tool is
not used. They should therefore be re-charged reg-
ularly.
Or better still – connect the battery to the mains
charger which will automatically switch to mainte-
nance charging after the battery has been fully
charged. This is particularly useful for maintenance
and for the optimal operational readiness of the
batteries.
Do not leave the battery in the charger if the latter
is not in operating condition.
3 Illustration
4 Technical Data
Electronic battery-driven rotary
screwdriver
133 MDX
Article number 12 04 2405
Right/Left rotation
No-load speed
1st Gear 0–450 min
–1
2nd Gear 0–1500 min
–1
Screwing into wood up to max. 6 mm
Drilling into steel up to 10 mm
Drilling into wood up to 16 mm
Spindle thread 3/8" UNF
Drill chuck span 1.5–13 mm
Mechanical torque selection in 7 stages
to approx. 7 Nm
Max. torque 18 Nm
Weight with battery approx. 1.75 kg
Rechargeable Battery A133
Article number
(Spare parts no. 32385)
98 03 4401
Type NiMH
Rated voltage 13.2 V
Capacity 3.0 Ah
Number of cells 11
Operating temperature range +5 °C ... +45 °C
Weight 0.8 kg
Battery charging unit MSL 60/2
Article number
(Spare parts no. 32332)
98 03 4301
Input voltage 230 V ~
Output voltage 13.2 V
Charging current/time approx. 3.2 A /
approx.
60 min (NiMH)
approx.
40 min (NiCd)
Weight approx. 0.5 kg
5 Noise/vibration information
6 Charging the batteries
133 MDX - GB Seite 10 Freitag, 24. März 2000 8:42 08
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kress 133 MDX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kress 133 MDX in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info