813986
32
Zoom out
Zoom in
Previous page
1/140
Next page
32
EN
Connecting it any other way may result in blocking the gas supply to the device. To do this, use the
appropriate tools. Tightening the regulator by hand is insucient and may result in gas leakage.
Replacement and/or connection of cylinders should take place in well-ventilated areas.
- Remember to make sure that the rubber seals are in place and not damaged before connecting the
reducer. If they are not, the device must not be used until the gasket is replaced.
- Remember that the gas cylinder should always stand upright, and the hose connecting the cylinder
to the burner should be laid in such a way that it does not come into contact with sharp objects or
edges, as well as hot parts of the burner.
- Check the correctness and tightness of the installed gas control system and the entire gas system of
the appliance. To do this, you can use soapy water or a dedicated gas leak detection spray. To check
for leaks, cover with soapy water or a sprayer all the joints (cylinder-reducer, reducer - tilt protection
valve, tilt protection valve - gas hose, gas hose - gas ow regulator, gas ow regulator - supply line,
supply line - burner ) between the cylinder and the gas ow regulator and those behind it, and then
re up the appliance so that the gas also lls the section from the gas ow regulator to the burner
nozzles. If bubbles appear at the joints, it will mean that there is a leak in this area.
- Remove the glass panes according to the instructions on page 19, arrange the decorative elements
evenly on the burner according to the graphic (Figure 6), then reinstall them.
NOTE: The safe distances from ammable materials to be maintained as indicated in this manual have
been established based on safety tests. We can call ammable materials anything that can catch re,
so paper, wood, fuels of all kinds, plastic, clothing, etc. The designated space is not limited by non-
-combustible materials, but also applies to ammable materials directly behind non-combustible
items exposed to the appliance.
If you are unsure of the nature of ammability of any material within the appliance, consult with re
ocials.
Remember that re-resistant materials are considered ammable despite their re resistance. They
may be dicult to set on re, but they also burn.
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kratki PATIO SLC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kratki PATIO SLC in the language / languages: English, German, Italian, Polish, Swedish, Spanish as an attachment in your email.

The manual is 2.12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info