813986
31
Zoom out
Zoom in
Previous page
1/140
Next page
31
EN
INSTALLATION OF THE APPLIANCE AND STORAGE OF CYLINDERS SHOULD BE IN ACCORDANCE
WITH APPLICABLE REGULATIONS
NEVER USE ANY SPARE PARTS THAT ARE NOT SUPPLIED OR RECOMMENDED BY THE MANUFAC-
TURER.
The device has an open combustion chamber without the option to connect it to a ue. The PATIO
SLC heater is sold with a pre-installed gas control system, but before the rst use it is recommended
to check the tightness of the system due to the possibility of its unsealing in transit. All instructions
for the proper connection of the system, installation of walls, doors and glazing can be found below
in the following section.
COMMENTS ON MOVING THE DEVICE:
This device is designed to be easily moved. Before moving the heater, make sure that the gas supply
has been shut o and the hose has been disconnected from the cylinder. Moving the unit while it is
in operation is strictly prohibited.
Any European gas cylinders up to 11 kg in weight and no wider than 33 cm and no taller than 65
cm are compatible with this device.
INSTALLATION RULES
Installation should be carried out in accordance with the requirements of the laws of the country or
region. In the absence of such regulations, the rules in this manual and re safety rules should be
followed.
This device has been tested for quality and safety and certied by a notied institute.
NOTE!
The heater is designed to work with an 11kg gas cylinder designed to store a mixture of propane,
propane-butane gases. The exible connection cable should be designed for liqueed petroleum
gas!
The device is sold with complete automation and cables connecting the main and control burner to
the controller. Do not use replacement system components other than those installed or supplied by
the manufacturer.
SELECTING THE LOCATION OF THE PATIO SLC GARDEN HEATER
The PATIO SLC gas heater is a mobile device, capable of moving to any location. However, there are
limitations that must absolutely be observed. The device, due to the possibility of high temperatures
on its external surfaces, especially the windows, should be kept away from ammable materials, and
due to the open combustion chamber without the possibility of connection to ue pipes, it should be
used in open spaces or in well-ventilated rooms. It is DEFINITELY PROHIBITED to place the appliance in
any position other than vertical.
Tips for proper and safe installation of the device:
- Connect the regulator to the liquid gas cylinder so that the anti-tilt valve is in the vertical position.
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kratki PATIO SLC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kratki PATIO SLC in the language / languages: English, German, Italian, Polish, Swedish, Spanish as an attachment in your email.

The manual is 2.12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info