Manual Kratki Antares (page 21 of 338) (English, German, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish)

813952

Zoom out

Zoom in

1/338

Thank you for your trust and for choosing our heater to warm your house. We produce our -

replaces with your safety and comfort in mind. We can be condent that our commitment to

designing and manufacturing replaces will be matched by your satisfaction in making this

excellent choice. Please read all the sections in this Manual carefully before starting any installa-

tion work and use. Please contact our technical-support department if you have any queries or

doubts. For any further information go to www.kratki.com

Kratki.pl Marek Bal is a renowned and appreciated heating appliance manufacturer, on both the Polish

and European markets. Our products are made in compliance with stringent standards. Each of the

replace reboxes we have manufactured undergoes internal quality inspection, during which it is

assessed in rigorous safety tests. The prime-quality materials we use in the production ensures that the

nal user will benet from a functional and reliable heating unit. This manual provides all the necessary

information for the correct connection, operation and maintenance of the rebox.

NOTE!!!

Please make sure that the replace is operated in the correct way: use suitable wood, and clean

regularly, to be rewarded with many wonderful and warm autumns and winters. Please nd be-

low a few guidelines for the correct maintenance of the replace reboxes by Kratki.pl

1. The rebox must be installed and adapted by qualied persons

2. Check the chimney ue at least once a year

3. Use dry hardwood with a humidity of up to 20%

4. Replace the sealing before every heating season (joint strengthening in the door and under the

glass)

5. Remove ash from the ash trap regularly

6. Do not overheat the rebox: maximum load must not exceed 1/3 of the combustion-chamber vo-

lume

7. Clean the glass with agents intended for such use, keeping in mind not to apply them directly onto

the glass, but on a cloth

INTRODUCTION

THE REQUIREMENTS ON THE CONDITIONS AND RULES OF INSTALLING HEARTHS SUCH AS FI-

REPLACE FIREBOXES OR FREE-STANDING WOOD-BURNING SPACE HEATERS CAN BE FOUND IN

THE APPLICABLE STANDARDS AND NATIONAL AND LOCAL REGULATIONS IN EVERY COUNTRY

ADHERING TO THE PROVISIONS CONTAINED THERE!

To avoid the risk of re, the appliance must be installed in compliance with the valid standards and

technical practice referred to in this Manual. Its installation must be carried out by a professional or

qualied person. The appliance conforms to EN 13240 and is CE certied.

Any applicable laws at the site where the appliance is installed must be adhered to at all times. Firstly,

make sure that the chimney ue is suitable.

The appliance must be installed in compliance with the applicable construction-law standards. The

rebox must be placed within a safe distance from any inammable materials. Protect walls and ma-

terials surrounding the rebox if necessary. Place the appliance on a rigid, non-ammable base; the

chimney must be air-tight with smooth walls. Prior to being connected, it must be cleaned of soot and

any contaminants; the connection between the chimney and the rebox must be air-tight and made of

non-ammable materials and protected against oxidation (enamel or steel ue liner).

If the chimney generates poor draught, consider installing new ducts. It is also important that the

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Kratki Antares in the language / languages: English, German, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 7.01 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Kratki Antares Manual

Product: