716930
26
Zoom out
Zoom in
Previous page
1/60
Next page
26
Small repairs do it yourself
No water from the nozzle but the gauge
shows full pressure: Most likely the nozzle
is blocked.
(Inside the pressure gauge there is no water but a
filling with glycol to damp the vibration of the pointer.)
Proceeding:
Switch off the cleaner. Pull plug from the
socket. Operate gun seveal times to decrease the
pressure. First unscrew gun and lance, then rinse hose
from any residues. Check water inlet filter for soiling. If the
problem still exists, take wire (paper clip) and push
cautiously through nozzle opening. If this procedure is not
successful, the nozzle has to be dismantled and cleaned
(from the backside) or even replaced, if necessary.
Pressure gauge shows little
pressure, the water from the nozzle comes in
squirts, the high-pressure hose vibrates.
Most likely the valves are soiled.
Proceeding:
Unscrew all 6 valves, one after the other
(hexagonal brass screws, 3 in a row,
vertically and horizontally)
Take out valve body (with green or red plastic
coating) and O-ring by means of needle nose
pliers. Check O-ring for damage. In case of a
damage the O-ring has to be replaced.
Take a wire (paper clip) and clean valves under
running water. Also clean valve seating inside the
pump.
Do not forget the O-ring during reassembly!
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kranzle therm 601 E-ST 18 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kranzle therm 601 E-ST 18 in the language / languages: English as an attachment in your email.

The manual is 3,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kranzle therm 601 E-ST 18

Kranzle therm 601 E-ST 18 User Manual - German - 60 pages

Kranzle therm 601 E-ST 18 User Manual - French - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info