716900
10
Zoom out
Zoom in
Previous page
1/29
Next page
18 19
General rules
General rules
Decalcifying
Calcified heat exchanger use an unnecessary amount of energy because the
water can only be heated slowly and the excess pressure valve feeds a part of the
water back into the high-pressure pump circuit.
The calcified heat exchanger is known by the increased pipeline resistance.
Check pipeline resistance by disconnecting the lance from the trigger gun with sa-
fety catch and switching the high-pressure cleaner on. A full jet of water emerges
from the gun. The high-pressure cleaner must be decalcified if the pressure
shown on the stainless steel pressure gauge is greater than 25 bar.
Decalcify high-pressure cleaner as follows:
1. Decouple the lance from the trigger gun with safety catch and decalcify it
separately.
2. Put detergent injector hose in a container with descaling agent.
3. Set detergent valve on highest concentration.
4. Set high-pressure cleaner at the main switch on "ON".
5. Hold the gun in a separate container and press the trigger gun with safety
catch.
6. Wait until descaling agent escapes at the trigger gun with safety catch
(recognizable by whitish colour)
7. Switch high-pressure cleaner at the main switch on "OFF" and let descaling
agent work for 15 - 20 minutes.
8. Switch high-pressure cleaner at the main switch on "ON" again and rinse it
for two minutes using clear water.
9. Please check whether the flow resistance has a lower value now again. If
necessary, please repeat the decalcification process.
Decalcifiers are caustic! Observe the instructions for usage and ac-
cident prevention. Wear protective clothing to prevent the decalcifying
agent from contacting your skin, eyes and clothing.
Fuel System
Your fuel may contain particles of dirt, or impurities or water may get into the
tank during refuelling. To protect the fuel pump the high-pressure cleaner is
equipped with a fuel filter. Check it regularly for dirt and exchange if applicable.
Check the tank for impurities on a regular basis. Clean the tank when necessary.
Empty the fuel tank using the drainage screw at the bottom of the tank. Clean
tank and fuel pipes thoroughly. Screw drainage screw back in.
Detergent and dirty fuel must be disposed of responsibly.
Check fuel system for dirt regularly.
No warranty is assumed for damage to the fuel system because of dirt.
The laws and regulations shall be observed and met by the operator.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kranzle Therm 1017 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kranzle Therm 1017 in the language / languages: English as an attachment in your email.

The manual is 8,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kranzle Therm 1017

Kranzle Therm 1017 Additional guide - English, German - 23 pages

Kranzle Therm 1017 User Manual - German - 29 pages

Kranzle Therm 1017 User Manual - Dutch - 29 pages

Kranzle Therm 1017 User Manual - French - 29 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info