668580
13
Zoom out
Zoom in
Previous page
1/108
Next page
13
Monitoring via CUE
By turning on the CUE button of a mixer channel, you can send its pre-
fader sound to the CUE bus.
1. Turn on the CUE button of the mixer channel you want
to monitor.
2. Use the MONITOR BAL knob to adjust the volume bal-
ance of the master output sound and the CUE bus
sound.
Use the MONITOR LEVEL knob to adjust the overall volume.
Adjusting the effect levels
If you’re using external effect processors, connect them to the EXT 1/2
SEND jacks and EXT 1/2 RETURN jacks.
1. Use each mixer channel’s EXT 1 and EXT 2 SEND knobs
to adjust the send levels that are output to the SEND
jacks.
Use the EXT 1 and EXT 2 RETURN knobs to adjust the return levels
that are received from the RETURN 1 and RETURN 2 jacks.
2. Use each mixer channel’s ZERO FX SEND knobs to ad-
just the send level to the (built-in) send effect.
Use the ZERO FX SEND RETURN knob to adjust the return level from
the send effect.
TIP: The CUE buttons for the EXT1, EXT 2, and ZERO FX re-
turns introduce their respective signals to the CUE bus before
the it passes through the return level knobs.
Set the return level to zero and turn the CUE button on (lit).
Now you’ll be able to use headphones (set to CUE) to adjust
the return sound. When you’ve adjusted the sound to your
liking, raise the EXT1, EXT2 or ZERO FX return level knobs
to send the signal to the master outputs.
3. Equalizer
Using the equalizer to adjust the sound
Traditionally, an equalizer (EQ) divides the sound into different frequency
regions, allowing you to shape the tonal character of the sound by boost-
ing or cutting the output of each region. In more modern applications, the
EQ can be used as an effect, providing filter sweeps and isolator functions.
The ZERO8 provides 11 different types of EQ.
1. Use the EQ SELECTOR knob to select the equalizer
type.
EQ type: These are a variety of EQ types with frequency re-
sponses suitable for different styles. Choose the type that’s ap-
propriate for your needs.
A ZERO EQ
B BOOST
C HYPED
D ROUND-Q
E SLAMMING
ISOLATOR type: This is a -12dB/oct isolator. It divides the in-
put sound into frequency regions, and allows you to individu-
ally cut the sound of each region. If you turn the knobs of all re-
gions completely toward the left, the sound will disappear com-
pletely.
F ZERO ISOLATOR
G ZERO ISOLATOR WIDE DIVIDER
H ZERO ISOLATOR LOW
FILTER type: These are filter types in which HI is an LPF and LO
is a HPF. Turning HI down (toward the left) will lower the cutoff
frequency of the LPF. Turning LO down (toward the left) will
raise the cutoff frequency. MID operates as a peaking EQ.
I ZERO FILTER
J ZERO FILTER DENSE
K ZERO FILTER SPIKY
2. Use the EQ knobs to control the type of EQ you se-
lected.
Adjust the three bands (HI/MID/LO) to obtain the desired tone.
The MID-FREQ knob sets the center frequency of the MID region.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Korg Zero 8 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Korg Zero 8 in the language / languages: English, German, French as an attachment in your email.

The manual is 3,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info