668580
6
Zoom out
Zoom in
Previous page
1/108
Next page
6
2. Parts of the ZERO8
Top panel
1–10
12, 13
11
28
14–16
17–20
21
27
22
23
24, 25
26
1. INPUT SELECTOR knob
Selects the input jack or FireWire audio signal that will be assigned to
the mixer channel. With this knob in certain positions, the send knobs,
pan knob, EQ knobs and/or faders will operate as MIDI controllers.
2. GAIN knob
Adjust the gain of the audio input assigned to the mixer channel.
TIP: If the MIC input level is too high, causing the sound to dis-
tort, press the rear panel MIC GAIN switch to change the mic
preamp gain to LOW.
3. EQ SELECTOR knob
Selects the type of EQ. Switching the EQ type will change the function
of the EQ knobs or vary the tonal character that occurs when adjusting
each of the HI/MID/LO frequency bands.
4. EQ knobs
Normally, the HIGH, MID, and LO knobs
boost or cut the sound in each frequency
range. The MID-FREQ knob changes the
center frequency of the MID range. Depend-
ing on the type of EQ selected in the previ-
ous step, the function of the knobs may
change.
5. PAN knob
Adjusts the left/right audio balance.
6. SEND knobs
EXT1, EXT2: Adjusts the send levels to the
effect processors connected to the EXT
SEND1/2 jacks.
ZERO FX SEND: Adjusts the send level to
the internal send effect (ZERO FX SEND).
7. SOLO/CUT switch
If you set this switch to the SOLO position,
only the sound of that mixer channel will be
sent from the master out. The sound of the
other mixer channels will not be output.
TIP: More than one mixer channel can
be set to SOLO.
If you hold the switch in the CUT position,
the sound of that mixer channel will be
muted.
TIP: You can’t leave the switch set to the
CUT position.
8. CUE button
When the CUE button is lit (ON), the pre-
fader sound of that mixer channel will be
sent to the CUE bus. By setting the MONI-
TOR BAL knob toward CUE, you can moni-
tor the sound of the CUE bus through head-
phones.
1
2
4
7
9
3
5
6
8
10
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Korg Zero 8 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Korg Zero 8 in the language / languages: English, German, French as an attachment in your email.

The manual is 3,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info