668583
15
Zoom out
Zoom in
Previous page
1/93
Next page
15
4. BPM system
In the ZERO4, the BPM (Beats Per Minute) setting is used as the master
clock for MIDI and for effects that are synchronized to the BPM. The
ZERO4 has an Auto BPM function that automatically detects the BPM from
an audio input source. You can also set the BPM manually.
Setting the BPM manually
Turn the TIME/AUTO push knob to specify the desired BPM.
Setting the BPM using tap tempo
Press the TAP button at least three times to the beat of the song. The inter-
val at which you pressed the button will be calculated, and specified as the
BPM value.
Setting the BPM automatically
Here’s how you can use the Auto BPM Counter to detect the BPM of a song
that’s being input
1. Press the BPM CH SELECT button to select the source
whose BPM you want to detect.
2. Press the TIME/AUTO push knob to turn AUTO BPM
on; the BPM will be detected automatically.
If the BPM was detected incorrectly, leave AUTO BPM turned on, and
press the TAP key at the beat of the song; the BPM will be automati-
cally detected using your beat as a guide. If AUTO BPM is on, changes
in the BPM of the audio input are detected automatically, and the BPM
is adjusted accordingly.
TIP: The BPM cannot be detected correctly for songs that don’t
have a definite beat.
5. Channel effects
The channel effects are inserted into each mixer channel.
You can choose from eight different effect types, and operate the TIME,
MOD, FB, and FX MIX knobs to control the sound.
TIME knob Adjusts a time- or speed-related parameter.
MOD knob Adjust a parameter that applies modulation to the
sound.
FB knob Adjusts a feedback-related parameter.
FX MIX knob Adjusts the DRY/WET amount of the effect (common
to all types).
Effect type list
LFO LPF A low pass filter whose cutoff frequency is
varied by an LFO.
TIME: Adjusts the LFO speed.
MOD: Adjusts the depth of LFO modulation.
FB: Adjusts the amount of resonance.
LFO HPF A high pass filter whose cutoff frequency
is varied by an LFO.
TIME: Adjusts the LFO speed.
MOD: Adjusts the depth of LFO modulation.
FB: Adjusts the amount of resonance.
PHASER An effect that creates modulation by using
an LFO to shift the phase of the sound.
TIME: Adjusts the LFO speed.
MOD: Adjusts the depth of LFO modulation.
FB: Adjusts the amount of resonance.
FLANGER An effect that creates intense modulation
and a sense of pitch movement. It is effec-
tive when applied to a sound that contains
numerous overtones.
TIME: Adjusts the LFO speed.
MOD: Adjusts the depth of LFO modulation.
FB: Adjusts the amount of feedback.
SLICER Cuts the sound in synchronization with
the BPM.
TIME: Adjusts the interval at which the sound is
cut.
MOD: Adjusts the proportion for which sound
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Korg Zero 4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Korg Zero 4 in the language / languages: English, German, French as an attachment in your email.

The manual is 3,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info