668615
116
Zoom out
Zoom in
Previous page
1/132
Next page
Using Drum Kits
110
Controlling effects for each key
A drum kit lets you set the insert effect and master
effect send for each key.
1. Access the PROG 8: Ed–InsertFX, BUS page.
2. Make sure that the “Use DKit Setting” check
box is checked.
When “Use DKit Setting” is checked, the
Program will use the “BUS Select” and Effects
Send settings for each key of the Drum Kit.
When “Use DKit Setting” is unchecked, the
Program will ignore the Drum Kit’s “BUS
Select” and Effects Send settings.
3. Access the GLOBAL 4: DKit, Voice/Mixer
page.
4. Use the “BUS Select” parameter to send drum
sounds through their own Insert effect, or to the
individual outputs.
If you like, you can send each note to its own
Insert effect, or to the individual audio outputs,
in addition to the main L/R outputs.
For example, you might send all snare sounds
to IFX, and the remaining sounds to L/R.
5. Use “Send1(MFX1)” and “Send2(MFX2)” to set
the send levels to the master effects.
Setting the pan for each key
To use separate pan settings for each key:
1. Access the PROG 5: Ed–Amp1/2, Level/Pan
page.
2. Under Pan, make sure that the “Use DKit
Setting” check box is checked.
When “Use DKit Setting” is checked, the
Program will use the pan settings for each key
of the Drum Kit.
3. Access the GLOBAL 4: DKit, Voice/Mixer
page.
4. Use the “Pan” parameter to specify the key’s
stereo output position.
Assigning a name
We recommend that you assign a name to the
Drum Kit you create.
You can do this by using the “Rename Drum Kit”
utility. For details on assigning a name, see p.112.
Saving a drum kit
When you’ve finished editing your drum kit, you
can save it.
Note: You’ll need to turn off the memory protect
setting for drum kits. In the GLOBAL 0: System,
Preference page, uncheck the Memory Protect
“Drum Kit” check box. (p.88)
1. Press the [UTILITY] button to access the utility
menu, and choose “Write Drum Kits.”
2. Press the [MENU/OK] button to write the
drum kit data.
A dialog box will ask you for confirmation.
3. Press the [MENU/OK] button to save, or press
the [EXIT/CANCEL] button if you decide not
to save.
The drum kit data will be written (saved).
116


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Korg X50 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Korg X50 in the language / languages: English as an attachment in your email.

The manual is 4,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info