668615

Korg X50 Manual

114
Zoom out
Zoom in
Previous page
1/132
Next page
Using Drum Kits
108
Saving and comparing data
• The edits you make in Global mode will be lost
when the power is turned off, so you need to
write (save) your edits if you want to keep
these changes. Three types of data are handled
in Global mode: user drumkit settings (GLO-
BAL 4), arpeggiator settings (GLOBAL 5), and
all other global settings (GLOBAL 0–3). You can
save each type of data into its own memory
area.
• Note that Compare can’t be used in Global
mode. If you want to edit a user drum kit or
user arpeggio pattern, you should first use
“Copy Drum Kit” or “Copy Arpeggio Pattern”
to copy the drum kit or user arpeggio pattern
you want to edit into a vacant number, and
then edit the copy.
Caution when a drum kit is used by
more than one program
When you edit a drum kit, your changes will affect
all programs that use that same drum kit. If you
want to edit one of the preloaded drum kits, it is
best to copy the drum kit into a vacant area of the
USER bank, and then edit the copy of the drum
kit.
Editing Drum Kits
Basic Editing
1. Select the Program that you wish to use while
editing the Drum Kit.
For more details, see “First, select a Drum
Program” (☞p.107).
2. Press the [GLOBAL] button to enter Global
mode.
3. Access the GLOBAL 4: DKit, High Sample
page.
4. Use the “Drum Kit” parameter, at the top of the
screen, to select the Drum Kit that you wish to
edit.
5. Use the “Key” parameter to select the note that
you wish to edit.
Use the front panel [VALUE] dial etc. to edit the
setting.
As a shortcut, you can also hold down the
[ENTER] button and play a note on the
keyboard.
This “Key” selection applies to all three Drum
Kit editing tabs.
6. Use the “Assign” check box to specify whether
the key will have its own settings, or use the
same settings as the next higher note.
If “Assign” is checked, the key will have its
own settings. This is the default.
If “Assign” is not checked, the key won’t have
its own settings. Instead, it will use the same
settings as the next higher note–except that the
drum samples will be played at a lower pitch.
The pitch that sounds will depend on the
PROG 2: Ed–Pitch, OSC1 page “Pitch Slope”
setting.
Use this setting when you want only to change
the pitch, such as with tom or cymbal sounds.
Placing drum samples
Here’s how to place two drum samples and switch
between them using velocity.
1. Access the GLOBAL 4: DKit, High Sample
page.
… 114 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Korg X50 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Korg X50 in the language / languages: English as an attachment in your email.

The manual is 4,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info