668615
94
Zoom out
Zoom in
Previous page
1/132
Next page
Global Mode
88
Linking the arpeggiator to programs
and combinations
You can specify whether the arpeggiator settings
written to a program or combination will also be
selected when you select that program or combi-
nation, or whether the arpeggiator settings will
remain in their current state when you switch the
program or combination.
When the X50 is shipped from the factory, the
former setting is selected. You can use the latter
setting if you want to use the same arpeggiator
settings to generate phrases and patterns while
you select and try out different programs and
combinations.
If the Auto Arp. “Program” or “Combination”
boxes are checked, selecting a program or combi-
nation respectively will also select the arpeggiator
settings that are written in that program or combi-
nation.
Preference Page
Recalling the last-selected mode and
page at power-on
The state of X50 when the power is turned on will
depend on the setting of “Power On Mode”.
If “Power On Mode” is set to Reset (factory set-
ting), X50 will automatically select the Combina-
tion mode 0: Play.
If “Power On Mode” is set to Memorize, X50 will
power on using the same mode and page that
were selected when the power was previously
turned off.
Protecting the memory
If one or more of the “Memory Protect” boxes are
checked, operations such as writing, loading etc.
will be prohibited for the corresponding type of
memory.
If you want to edit and write (save) settings, you’ll
need to uncheck this box. In order to load the pre-
loaded data, you’ll first need to uncheck the Mem-
ory Protect box for the data you want to load.
Foot Page
Specifying the function of the
ASSIGNABLE Switch and ASSIGN-
ABLE Pedal
Assignable Switch
Foot SW Assign lets you assign a function to a
footswitch, such as the optional Korg PS-1, con-
nected to the rear-panel ASSIGNABLE SWITCH
jack.
This is set by “Foot SW Assign.”
You can choose from the following functions:
Alternate modulation source
Effect dynamic modulation source
Switch portamento on/off
Control the sostenuto effect
Turn the soft pedal effect on/off
Arpeggiator on/off
Select programs or combinations (up/down)
Tap tempo
Aftertouch transmission
The functions of controllers such as the [MOD]
wheel or knobs [1]–[4]. (PG p.164)
Assignable Pedal
You can specify the function of an assignable
pedal, such as the optional XVP-10 EXP/VEL
pedal or EXP-2 foot controller, connected to the
ASSIGNABLE PEDAL jack.
This is set by “Foot
Pedal Assign.”
You can choose from the following functions:
Master volume
Alternate modulation source
Effect dynamic modulation source
Portamento pitch change speed
Volume
The pan following an insert effect
Pan
Expression
Send levels to the master effects
Aftertouch transmission
Duplicate the function of another controller,
such as the [MOD] wheel or knobs [1]–[4]
(PG p.165)
94


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Korg X50 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Korg X50 in the language / languages: English as an attachment in your email.

The manual is 4,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info