668615

Korg X50 Manual

92
Zoom out
Zoom in
Previous page
1/132
Next page
Effects settings
86
2. Return to the PROG 8: Ed–InsertFX, IFX page,
and set the C Fb (C Delay Feedback) “(Source)”
to SW1 #80.
3. Set “(Amount)” to +30.
4. (Move the [MOD] wheel.) Press the [SW1]; the
feedback level will increase, and the delay
sound will continue for an extended time.
The “(Amount)” setting determines the
feedback level when the [SW1] is pressed. If
you set “(Amount)” to –10 and press the [SW1],
the feedback level will be 0.
Using the BPM/MIDI Sync. function
to synchronize the delay time to
arpeggiator tempo changes.
The BPM/MIDI Sync. function lets you synchro-
nize the delay time to the tempo of the arpeggio.
1. In the PROG 8: Ed–InsertFX, IFX page, set
“BPM” to MIDI.
2. For L, C, and R, set “L/C/R Bs” and “Times” as
desired.
For this example, set “L/C/R Bs” to and
“Times” to 1 so that the effect will be easily
understandable. The delay time will repeat at
an interval of a 8th note.
3. Set the realtime controller function to C-mode,
and rotate REALTIME CONTROLS knob [4]
(“TEMPO”).
(Move the [MOD] wheel.) Operate the knob;
the delay time will change.
4. Turn on the [ARP ON/OFF] button to start the
arpeggiator.
Select an arpeggio pattern as desired.
(Move the [MOD] wheel.) When you rotate
REALTIME CONTROLS knob [4], the delay
time will change in synchronization to any
changes you make in the arpeggiator tempo.
If you rotate the REALTIME CONTROLS
knob [4] to change the tempo while the delay
is sounding, noise may occur in the delay
sound. This is because the delay sound
becomes discontinuous, and is not a
malfunction.
For some effects, you can synchronize the
LFO frequency to the tempo. Set the effect
parameters “BPM/MIDI Sync” to On, and
“BPM” to MIDI. For details see PG p.160.
Saving edited effect settings
Effect parameters that you edit in Program mode
are saved when you write the program. Similarly,
effect parameters that you edit in Combination
mode or Multi mode are saved when you write
the combination or multi set. (☞p.45, 61, 75)
Bypassing the insert effect or
the master effects
Normally, you will switch the effects on/off indi-
vidually for each program, combination, or multi
set. However, you also have the option of bypass-
ing the insert effect or master effects for the entire
X50 if you don’t want to use them.
For example, this can be useful when you’re using
an outboard effect such as reverb, chorus, or com-
pressor to create an effect that you would other-
wise create using the X50’s master effects, or when
you’re using a plug-in effect on your computer to
process the sound of the X50 together with other
sound sources.
1. Press the [GLOBAL] button to enter Global
mode.
2. Access the GLOBAL 0: System, Basic page.
3. Check the “IFX Off” check box if you want to
bypass the insert effect.
Check the “MFX1 Off” dialog box if you want
to bypass master effect 1, or the “MFX2 Off”
dialog box if you want to bypass master effect
2.
… 92 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Korg X50 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Korg X50 in the language / languages: English as an attachment in your email.

The manual is 4,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info