488479

Korg SoundLink DRS 1212 I-O Manual

40
Zoom out
Zoom in
Previous page
1/58
Next page
Applications
36 Korg 1212 I/O
English
note: ADAT timecode synchronization and clock source,” on page 20, for
more information.
When synchronizing to ADAT timecode, the 1212 I/O’s word clock source
cannot be set to Internal.
SMPTE and MTC offsets have no effect on ADAT timecode
Some ADAT devices, such as the Alesis BRC and Fostex RD-8, allow you to
enter SMPTE and/or MIDI Time Code (MTC) offsets from the normal
ADAT timecode. It is important to remember that these offsets do not affect
the basic ADAT timecode itself, as it is sent along the ADAT sync cables;
the offsets only affect synchronization through the device’s SMPTE or
MIDI inputs and outputs.
The 1212 I/O listens only to the simple, unadulterated timecode carried on
the ADAT sync cable. This means that entering a SMPTE offset on the BRC,
for instance, has no effect on the sync received by the 1212 I/O.
Using Premiere Plug-Ins with 1212 I/O-compatible software (MacOS)
Premiere Plug-Ins automatically use the Apple Sound Manager for
preview audio output. When the 1212 I/O is selected as the Sound
Manager output device, the previews will play back through the 1212 I/O.
Since Premiere Plug-Ins use the Sound Manager, they are totally unaffected
by the output assignments in software which directly supports the
1212 I/O (such as Deck II); instead, they use the output channels assigned
to the Sound Manager in the 1212 I/O Utility.
For more information on using the 1212 I/O with the Sound Manager,
please see the chapter “Sound Manager (MacOS),” beginning on page 39.
Using the Alesis BRC: 1212 I/O output to ADAT input
The BRC’s track routing features (under the BRC’s Digital I/O button)
control the digital I/O routing for the ADAT system. When copying tracks
between ADATs, the BRC is used to select one or more source tracks on a
single ADAT machine; this machine becomes the digital audio
“transmitter,” and the selected tracks are sent out on the optical bus. All the
other ADATs in the system become audio “receivers,” listening to the
output of the transmitter and passing it on to their own outputs.
When using the 1212 I/O as the digital I/O source, all of the ADATs need
to be receivers. If one of the ADATs is acting as a transmitter, then it will
block the output of the 1212 I/O to all subsequent ADATs in the optical
loop.
The diagram below shows the 1212 I/O connected to a three-ADAT
system, with the optical inputs and outputs of all the devices chained
together. Using the digital I/O routing feature of the BRC (not shown),
… 40 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Korg SoundLink DRS 1212 I-O at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Korg SoundLink DRS 1212 I-O in the language / languages: English as an attachment in your email.

The manual is 0,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Korg SoundLink DRS 1212 I-O

Korg SoundLink DRS 1212 I-O User Manual - German - 67 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info