488479

Korg SoundLink DRS 1212 I-O Manual

39
Zoom out
Zoom in
Previous page
1/58
Next page
Applications
Korg 1212 I/O 35
English
before the machine containing the source tracks. This is because the source
machine will block the output of the 1212 I/O, in favor of its own output.
For instance, let’s say that you have a three-ADAT system, with the
1212 I/O at the end of the ADAT chain. If the source tracks are on ADAT
#2, you can record the S/PDIF output onto ADAT #1, but not onto ADAT
#3. If the source tracks are on ADAT #3, you can record the S/PDIF output
onto either ADAT #1 or ADAT #2.
Bouncing ADAT tracks
You can use the 1212 I/O Utility to bounce audio from one ADAT track to
another–for instance, from tracks 1 and 2 to tracks 3 and 4.
1. In the 1212 I/O Utility, set the desired ADAT inputs to the desired
ADAT outputs.
2. Set the 1212 I/O’s Clock Source to ADAT.
3. Set the ADAT system’s word clock to Internal.
For more information, please see “Setting the word clock source on an
ADAT system” on page 19.
If you are using the Alesis BRC, read the instructions under “Using the
Alesis BRC: 1212 I/O output to ADAT input,” on page 36.
Synchronizing to ADAT timecode
The 1212 I/O provides rock-steady, drift-free ADAT audio and timecode
synchronization. When used with compatible digital audio software, this
creates a non-linear editing system directly integrated into your ADAT
system–which can also operate as an additional, ADAT-compatible
multitrack.
To set up your digital audio software for ADAT timecode synchronization:
1. Select the 1212 I/O as the audio input and output hardware, as well
as the timecode source.
See your digital audio software’s manual for more information.
2. In the digital audio program, set the 1212 I/O’s word clock source to
ADAT.
For more information, please see “Setting the word clock source in digital
audio software” on page 16 for more information.
3. Set the ADAT system’s word clock to Internal.
For more information, please see “Setting the word clock source on an
ADAT system” on page 19.
When using a BRC and/or ADAT XTs, you may also set the ADAT word
clock to Digital, and the 1212 I/O to S/PDIF•Word Clock. See “Special
… 39 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Korg SoundLink DRS 1212 I-O at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Korg SoundLink DRS 1212 I-O in the language / languages: English as an attachment in your email.

The manual is 0,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Korg SoundLink DRS 1212 I-O

Korg SoundLink DRS 1212 I-O User Manual - German - 67 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info