668721
73
Zoom out
Zoom in
Previous page
1/94
Next page
67
Synchronizing the arpeggiator
The 42. MIDI page “Clock” (knob [4]) setting specifies whether the R3’s arpeggiator
will be the master (the controlling device) or slave (the controlled device).
For information on synchronization-related settings of your external MIDI de-
vice, refer to the manual of your device.
1. Using the R3 as master and the external MIDI device as slave
Connect the R3’s MIDI OUT connector to the MIDI IN connector of your external
MIDI device (p.64).
Use the [PAGE] dial to select the 42. MIDI page, and set “Clock” (knob [4]) to Inter-
nal; the R3 will be the master device, and will transmit MIDI timing clock messages.
Set your external MIDI device so that it will receive incoming MIDI clock messages.
Now your external MIDI device (sequencer, rhythm machine, etc.) will operate at
the tempo specified by the R3’s [TEMPO] knob.
2. Using the external MIDI device as master and the R3 as slave
Connect the R3’s MIDI IN connector to the external MIDI device’s MIDI OUT con-
nector (p.64). If you select the [PAGE] dial to the 42. MIDI page, and set 42. MIDI
page “Clock” (knob [4]) to Ext MIDI, the R3 will be the slave.
The R3’s arpeggiator will operate at the tempo of the external MIDI device (sequencer,
rhythm machine, etc.).
If you set 42. MIDI page “Clock” (knob [4]) to Auto, the R3 will automatically
function using the Ext MIDI setting if MIDI clock is being received from an
external MIDI device connected to the MIDI IN connector. Otherwise, the R3
will function using the Internal setting.
If the R3 is synchronized to the MIDI clock of an external MIDI device, its ar-
peggiator will reset when a MIDI Start message [FA] is received. This will also
cause LFOs and modulation sequences to be reset if “Key Sync“ is Off.
Using the R3 with other MIDI devices (MIDI)
73


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Korg R3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Korg R3 in the language / languages: English as an attachment in your email.

The manual is 5,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info