668721
44
Zoom out
Zoom in
Previous page
1/94
Next page
38
13. DRIVE/WS (Drive/Wave Shape)
In this page you can set the Drive or Wave Shape parameters. This lets you add distortion to the sound and give it a distinctive impact.
Knob [1]
WS Type (Wave Shape Type)
[Off, Drive…Lvl Boost]
This switches wave shaping on/off, and se-
lects the type. Wave shaping modifies the
input waveform by applying a transforma-
tion of the type you specify here, and pro-
duces an output waveform that includes
the components of both the input wave-
form and the transformation shape. “WS
Depth” specifies the depth of this effect.
Some settings may produce noise.
Off: Wave Shape/Drive is off.
Drive: Drive will be applied. The amount
of distortion is adjusted by the output level
of each oscillator in the 7. Mixer page
(p.39 Figure 13-1).
Only the Drive setting differs from the
wave shape effect.
Decimatr: Lowers the sampling frequency
(p.39 Figure 13-2).
HardClip: Flattens any portion of the wave-
form above the limit
(p.39
Figure 13-3).
()
Knob [2]
Position [PreFilt1, Pre Amp]
Specifies the position at which the drive
or wave shape functions will be applied.
PreFilt1: Drive or wave shape will be ap-
plied before filter 1 (p.39 Figure 13-9).
Pre Amp: Drive or wave shape will be ap-
plied after the filter and before the amp
(p.39 Figure 13-10).
Knob [1] ()
OctSaw: Cuts the portion of the waveform
above the threshold level and inverts it to
keep it within limits.
(p.39
Figure 13-4).
MultiTri: Sending a sawtooth wave
through this will produce a triangle wave
(p.39 Figure 13-5).
MultiSin: Sending a sawtooth wave
through this will produce a sine wave
(p.39 Figure 13-6).
SbOSCSaw, SbOSCSqu, SbOSCTri,
SbOSCSin: The selected waveform will
sound one octave below oscillator 1.
“Depth” (knob [3]) adjusts the mix amount
relative to oscillator 1. ()
Knob [1] ()
Pickup: This simulates an electromagnetic
pickup. “Depth” (knob [3]) adjusts the
depth (p.39 Figure 13-7).
The above illustration for Pickup
shows differences in the output wave-
form when a sine wave at C4 is input.
The transformation will vary depend-
ing on the input pitch.
LvlBoost: Boosts the output level. “Depth”
(knob [3]) adjusts the amount of boost
(p.39 Figure 13-8).
This may produce high output vol-
umes than other wave shape types.
Knob [3]
WS Depth (Wave Shape Depth)
[000…127]
Specifies the depth at which the drive or
wave shape functions will be applied.
44


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Korg R3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Korg R3 in the language / languages: English as an attachment in your email.

The manual is 5,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info