668721
40
Zoom out
Zoom in
Previous page
1/94
Next page
34
9. FILTER1-B
Here you can set the values of the filter 1 parameters.
Knob [1]
EG1 Int1 (EG1 Intensity/Filter1) [–63...63]
This specifies how time-variant modula-
tion from the EG1 will be applied to the
cutoff frequency (Figure 9-1). The cutoff
frequency will change over time according
to the EG1 settings, modifying the tone. For
example, you can use this to create a sound
that gradually begins to brighten when you
press the key, and then gradually becomes
darker.
“EG1 Int1” parameter specifies the depth
(sensitivity) to which the EG1 will affect
the cutoff frequency.
With a setting of 0, the EG1 will not affect
the cutoff frequency.
Increasingly positive (+) settings will allow
the EG1 to have a correspondingly greater
effect on the cutoff frequency (Figure 9-2).
Increasingly negative (-) settings will allow
a correspondingly greater effect in the op-
posite direction (Figure 9-3). ()
Knob [3]
VelSens1 (Velocity Sensitivity/Filter1)
[–63…+63]
Specifies how velocity (keyboard playing
dynamics) will affect the cutoff frequency.
Positive (+) values will cause the cutoff fre-
quency to rise as you play more strongly.
Negative (-) values will cause the cutoff
frequency to fall as you play more strongly.
Knob [1] ()
Figure 9-1: EG Intensity
Time
Note on
Note off
Cutoff
Sustain Level
Attack
Time
Decay
Time
Release Time
Figure 9-2: EG Intensity positive settings
Note on
Note off
Note on
Note off
Cutoff
Int=+32
Int=0
Int=+63
Time
Cutoff frequency
specified by
“Cutoff”
Figure 9-3: EG Intensity negative settings
Cutoff frequency
specified by
“Cutoff”
Note on
Note off
Note on
Note off
Cutoff
Int=–32
Int=0
Int=–63
Time
Knob [2]
Key Trk1 (Keyboard Tracking/Filter1)
[–2.00...+2.00]
This specifies how keyboard tracking (the
keyboard location that you play) will affect
the cutoff frequency. For example if the
sound played by the C4 key has the desired
tone but higher notes no longer have reso-
nance or are too mellow-sounding, you can
adjust keyboard tracking to make compen-
sations so that the cutoff frequency will rise
for higher notes.
With positive (+) settings, the cutoff frequency
will rise as you play upward from the C4 note,
and fall as you play downward.
With negative (-) settings, the cutoff frequency
will fall as you play upward from the C4 note,
and rise as you play downward.
With a setting of +48, the change in
cutoff frequency will be proportionate
to the change in pitch. With a setting
of 0, keyboard tracking will not affect
the cutoff frequency.
Keyboard Track operates according to
the pitch that is controlled by pitch
bend, and transpose. It is not affected
by pitch changes produced by vibrato
or Virtual Patch.
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Korg R3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Korg R3 in the language / languages: English as an attachment in your email.

The manual is 5,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info