668721
24
Zoom out
Zoom in
Previous page
1/94
Next page
18
Formant Motion
8
Speak or sing into the mic.
9
Press the FORMANT MOTION [REC] button to stop recording.
Recording will stop automatically when the memory is full.
10
Press the FORMANT MOTION [ON/OFF] button (the button will
light).
Now you can play the vocoder program using the formant motion
data that you just recorded.
Saving
Here’s how to save the formant motion data you just recorded.
11
Press the [WRITE] button.
Make sure that the main display indicates “Formant” (i.e., that
formant motion data is the data that will be saved).
If the display indicates “Program“ or “Global,” use the [PAGE] dial to
select Formant.
12
Press the [WRITE] button once again.
The main display will indicate the save-destination data number.
13
Use the [PAGE] dial to specify the numbered location (1-16) where you
want the formant motion data to be saved.
14
Press the [WRITE] button.
The formant motion data will be saved into the numbered location
that you specified.
5
10
6, 7, 9
11, 12, 14
13
1. What is a Formant Motion?
Basically, the Formant Motion function records and saves the vocoder’s
“analysis” of a changing modulator signal. This saved formant motion
data can be used to produce vocoder effects without having to vocalize
into a mic each time you perform. In its internal memory, the R3 can store
sixteen sets of formant motion data, each up to 7.5 seconds long. Vocoder
programs (programs for which the [VOCODER] button is lit) can use this
data. When the R3 is shipped from the factory, bank O (FORMANT
MOTION) contains preloaded programs that use formant motion data.
You can select and play programs from this bank to hear the formant
motion effect.
2. Recording formant motion data
Preparing to record
1
Turn the [AUDIO INPUT 1] knob all the way to the left, and set the
[MIC] switch to XLR.
2
Connect the included mic to the [MIC] connector (p.8).
3
Select a vocoder program from bank P (VOCODER). The [VOCODER]
button will light up.
4
Sing or talk into the mic, and turn the [AUDIO INPUT 1] knob up (to
the right) as far as you can, without allowing the AUDIO INPUT 1 LED
to light red.
Recording
5
Press the [VOCODER] button.
The button will blink.
6
Press the FORMANT MOTION [REC] button.
The button will blink, and you’ll be in the record-ready condition.
7
Press the FORMANT MOTION [REC] button once again.
The moment you press the [REC] button, recording will begin and the
button will light.
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Korg R3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Korg R3 in the language / languages: English as an attachment in your email.

The manual is 5,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info