668722

Korg PXR4 Pandora Manual

87
Zoom out
Zoom in
Previous page
1/99
Next page
Appendices
85
→ Set the counter display to “FreeTime” and check the
amount of recordable time. (→p.56)
Is the bounce setting (“BOUNCE”) appropriate?
(→p.29)
→ If the bounce setting (“BOUNCE”) is set to “CONV,”
the recording will be created as a new song. (→p.51)
Can’t record two tracks simultaneously
The “EFFECT ASSIGN” (effect insert location) may
have been set to “GUITAR.”
→ If this is set to “GUITAR,” only one track can be
recorded simultaneously.
Input sound or recorded sound contains noise or distor-
tion
Is the [TRIM] knob raised to an appropriate level?
→ If the [TRIM] setting is too high the sound will distort;
if it is too low, noise will be heard. (→p.18)
If the effect input is distorted, make the following
adjustments.
Guitar/insert effect: Hold down the [SHIFT] key and
press the [DISPLAY] key, and select the “PRE” setting
for “DISPLAY.” Then use [TRIM] etc. to adjust the
input volume as high as possible without allowing
“CLIP” to light in the level meter.
Master effect: Adjust the faders and send level so that
“CLIP” for the master L/R track does not light.
Final effect: Adjust the faders so that “CLIP” does not
light for the master L/R track.
If the effect output is distorted, make the following
adjustments.
Guitar/insert effect: Adjust the effect parameters and
[TRIM] while listening to the sound.
Master/final effect: Adjust the effect parameters so
that “CLIP” for the master L/R track does not light.
Effect does not apply
Tuner mode may have been selected.
→ The effect will be bypassed (off) when the tuner is
selected.
Is the master volume of the effect program set to “0”
or close to “0”?
→ Press the [EFFECT] key, then press the [CURSOR]
right key several times to display “ProgMVol,” and
raise the volume setting.
Is the [TRIM] knob raised to an appropriate level?
→ If the [TRIM] setting is too low, the effect may not be
applied in some cases.
Guitar/insert effect does not apply
Is the effect insert location appropriate?
→ Hold down the [SHIFT] key and press the [EFFECT]
key, and set “EFFECT ASSIGN” to “GUITAR” or
“INSERT.” (→p.35)
It is not possible to use a guitar/insert effect on a play-
back track.
Master effect does not apply
Is the effect insert location correct?
→ Hold down the [SHIFT] key and press the [EFFECT]
key, and set “EFFECT ASSIGN” to “MASTER.”
(→p.35)
Is the send level from each track set to “0”or close to
“0”?
→ Press the [MIXER] key, and use the [CURSOR] keys to
raise the “Send-L” and “Send-R” send levels.
… 87 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Korg PXR4 Pandora at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Korg PXR4 Pandora in the language / languages: English as an attachment in your email.

The manual is 4,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info