668722
86
Zoom out
Zoom in
Previous page
1/99
Next page
84
Appendices
Troubleshooting
No sound
Is the power of the PXR4 and/or connected devices
turned on? (p.14)
Are the amp or headphone connections correct?
Can’t hear the playback
The [MASTER] fader or [PHONES] knob may have
been set to “0.”
The track volume level may have been lowered.
After using the faders for effect editing, or after using
the faders to adjust pan or send, the position of the
faders may not match the actual volume levels.
After pressing the [EXIT] key to exit the current mode,
raise and lower the faders so that the actual volume
levels match the fader positions, and then adjust the
levels appropriately.
If when using punch-in/out you cannot hear the play-
back for other than the specified recording range of
the recording track, you may have turned the
“AutoIn” function “On.” (p.27)
Can’t hear the input sound
Is the [INPUT SELECT] switch set correctly?
Have you pressed a [REC SELECT] switch to set the
desired input track as the recording track (a symbol
displayed by the number)?
Is the [TRIM] knob raised to an appropriate level?
Make sure that sound is being input.
Hold down the [SHIFT] key and press the [DISPLAY]
key to set the “DISPLAY” indicator to “PRE,” and
watch the meter to verify that sound is being indicated
for each of the mixer tracks.
Raise the [TRACK] and [MASTER] faders to appropri-
ate positions. If the level meters do not move, no
sound is being input to the tracks.
If you no longer hear the input sound when a record-
ing track ( displayed at the number) is played back,
did you set “AutoIn” to “Off”? (p.27)
[TRACK] faders don’t work
After using the faders to edit an effect, or after using
the faders to adjust pan or send levels, the position of
the faders may not match the actual volume levels.
After pressing the [EXIT] key to exit the current mode,
raise and lower the faders so that the actual volume
levels match the fader positions, and then adjust the
levels appropriately.
Can’t record
The [TRACK] faders may have been lowered (for con-
ventional recording).
The [MASTER] fader may have been lowered (for
bounce recording: i.e., when something is selected for
“BOUNCE”).
Is the [REC SELECT] of the recording track set to REC
( displayed at the number)?
Is there enough free space on the card?
86


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Korg PXR4 Pandora at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Korg PXR4 Pandora in the language / languages: English as an attachment in your email.

The manual is 4,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info