668723
15
Zoom out
Zoom in
Previous page
1/68
Next page
Connections Connecting a damper pedal, foot switch, or foot pedal
11
Connecting a damper pedal,
foot switch, or foot pedal
If you connect an optional damper pedal, foot switch,
or foot pedal to the PS60, you’ll be able to control the
PS60 using your feet.
When using the ASSIGNABLE PEDAL/SW1/DAMPER
jack, you can connect a damper pedal, foot switch, or
foot pedal. (The default setting is Damper.)
When using the ASSIGNABLE PEDAL/SW2 jack, you
can connect a foot switch or an assignable pedal. (The
default setting is Switch.)
Note: A foot switch or foot pedal can be connected to
either the ASSIGNABLE PEDAL/SW1/DAMPER jack
or the PEDAL/SW2 jack. In global mode, specify the
controller type (Type) (p. 52).
Connecting a damper pedal
When you press the damper pedal, the notes you’ve
pressed will be sustained so that they will continue
even after you take your hands off the keyboard. This
is also called a sustain pedal; it has the same function
as the damper pedal of an acoustic piano.
If the optional Korg DS-1H damper is connected,
you’ll be able to take advantage of the “half-damper
effect, in which the depth to which you press the pedal
will vary the damper amount. If any other type of
pedal is connected, it will function as a damper switch.
With the factory settings, the PS60 is set so that
connecting a DS-1H to the ASSIGNABLE PEDAL/
SW1/DAMPER jack allows you to use it as a damper
pedal. If you want to change this setting, proceed as
follows.
1. Connect a Korg DS-1H damper pedal to the
ASSIGNABLE PEDAL/SW1/DAMPER jack.
2. Depending on which assignable jack you have
connected the pedal to, set the controller type
(Type) to Damper, and set the Polarity as
appropriate (p. 52).
Note: The half-damper sensitivity is adjusted to a stan-
dard value when the PS60 is shipped from the factory.
If the half-damper pedal you’re using does not
respond appropriately, please adjust the sensitivity
(p. 53).
Connecting a foot switch
You can use a foot switch to control the sound or effect
modulation while you perform, switch portamento on/
off, or switch performances.
With the factory settings, the ASSIGNABLE PEDAL/
SW2 jack is set to use a Korg PS-1 foot switch. If you
want to change this setting, proceed as follows.
1. Connect an optional Korg PS-1 foot switch to the
ASSIGNABLE PEDAL/SW2 jack or the PEDAL/
SW1/DAMPER jack.
2. Depending on which assignable jack you have
connected the pedal to, set the controller type
(Type) to Switch, and set the Polarity as
appropriate (p. 51, 52).
Connecting a foot pedal
You can use a foot pedal to control settings such as the
volume, modulation, portamento time, pan, or effect
send amount while you perform.
1. Connect a separately sold Korg EXP-2 foot
controller or XVP-10 expression/volume pedal to
the ASSIGNABLE PEDAL/SW2 jack or 1/
DAMPER jack.
2. Depending on which assignable jack you have
connected the pedal to, set the controller type
(Type) to Pedal (p. 51).
Note: The foot pedal sensitivity is adjusted to a stan-
dard value when the PS60 is shipped from the factory.
If the foot pedal you’re using does not respond appro-
priately, please adjust the sensitivity (p. 53).
DAMPER
SWITCH
PEDAL
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Korg PS60 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Korg PS60 in the language / languages: English as an attachment in your email.

The manual is 7,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info