Manual Korg PS60 (page 7 of 68) (English)

668723

Zoom out

Zoom in

1/68

Front and rear panels Front panel

When you press one of these buttons, the display will

alternate between showing performance-related

information and timbre-related information.

Note: If you’re making single or layer settings, make

sure that the indicators are lit for all of the timbres that

are turned on. When making split settings, you can

press the LOWER or UPPER button to see the indica-

tors of the timbres that are turned on for the lower and

upper regions specified by the SPLIT SETTING but-

tons.

Variation the  buttons

Use these buttons to select variations (programs) for

each timbre.

5. SPLIT SETTING

Here you can divide the PS60’s keyboard into lower

and upper regions and specify timbres separately for

each region. Such setups are called “splits” (p. 14).

LOWER and UPPER buttons

Use these buttons to specify the timbres for the lower

or upper region, or to check the timbres that are split.

If you press one of these buttons when (non-split)

single or layer settings are active, the Timbre On

button will blink, and you’ll be able to select the timbre

used by the button you pressed (LOWER or UPPER).

You can press the EXIT button to exit this state. If split

settings are active, pressing one of these buttons lets

you see which timbres are used by the lower or upper

region; the Timbre On button of the corresponding

timbres will light.

How to specify the split point: Press the LOWER

button and UPPER button simultaneously. Then press

the key that you want to specify as the split point; that

key will be the new split point. If you decide not to

make the setting, press either of these buttons or the

EXIT button.

SUB OFF/RECALL button

This button temporarily cancels the split setting so that

only the main timbre (p. 7) will be played by the full

range of the keyboard. If you press this button to

cancel the split setting, the button indicator will light.

The sub timbre settings are remembered while this

button is lit.

Audition function: If you press the SUB OFF/RECALL

button and the LOWER button simultaneously, a riff

(phrase) specified for each timbre program will play

repeatedly. This function will turn off when you press

either button or the EXIT button. You won’t be able to

turn this function on if layer or split settings are active

(p. 16).

6. MODULATION

Here you can add rich spaciousness, modulation, or

movement to the sound (p. 20).

MODULATION TYPE button

Use this button to select the effect type. Each press of

the button will cycle through the effect types (the

corresponding indicator will light).

CHORUS: Stereo chorus that adds richness and

warmth to the sound

FLANGER: Stereo flanger that applies dramatic

modulation and a sense of pitch change to the sound

VINTAGE CHO/FLG: Vintage analog chorus/flanger

that produces the warm and rich sound typical of an

analog effect processor

PHASER: Stereo phaser that produces modulation by

shifting the phase of the sound

EFFECT OFF: (no indicators lit)

6 7 8

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Korg PS60 in the language / languages: English as an attachment in your email.

The manual is 7,14 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Korg PS60 Manual

Product: