668724
23
Zoom out
Zoom in
Previous page
1/450
Next page
19
Overview
Rear Panel
Introduction
Rear Panel
Music stand
Music stand holes
A music stand comes standard with your Pa900. Insert its legs
into these two dedicated holes.
Video
VIDEO OUT
You can connect Pa900 to a TV or video monitor.
Pa900 is compatible with the NTSC, PAL and
SECAM TV standard. When connecting a SECAM-
compliant TV set, select the PAL standard. However,
in this latter case, the image will be shown in black and white.
1. Connect the instruments video output to the video input of
the television set. Depending on the type of television set, you
can use a cable of the type “RCA-to-RCA” (if the television set is
equipped with a Video Composite input), or “RCA-to-SCART”
(if the television set is equipped with a SCART connector). You
can buy the needed cables at a store that sells television equip-
ment.
2. Turn the instrument on, and press the GLOBAL button to gain
access to the Global mode. Go to the Audio & Video > Video
Out page, and select the video standard (PAL or NTSC).
3. Turn the television set on, and tune it on the correct AV input.
4. In the same page of the Global, use the Colors parameter to
choose the preferred set of colors for the lyrics and the back-
ground.
USB Device Connector
Use this connector to connect Pa900 to a personal
computer.
DEVICE
This is a USB Type B (Slave/Device) connector, USB 2.0 (High
Speed). Use it to connect the Pa900 to a personal computer, and
transfer data to/from its internal memory (Disk). You can enable
USB connection in the “USB” page of the Media mode.
MIDI over USB is supported, so you can use this connector
instead of the MIDI ports. The drivers for PC and Mac, needed
to make full use of this type of connection, are supplied in the
Accessory Disc that comes with the instrument, or can be down-
loaded from our web site.
Pedals
Use these connectors to connect various
types of pedals.
ASSIGNABLE
Use this port to connect a continuous- or footswitch-type pedal,
like the (optional) Korg EXP-2, XVP10, PS-1 or PS-3. To pro-
gram and calibrate it, go to the Controllers > Foot Controllers
page of the Global mode.
DAMPER
Use this to connect a Damper pedal, like the (optional) Korg
PS1, PS3 or DS1H. To change its polarity and calibrate it, go to
the Controllers > Foot Controllers page of the Global mode.
Note: Half-pedalling on Piano Sounds is available when connect-
ing a DS1H Damper pedal.
MIDI Interface
The MIDI interface allows your Pa900
to be connected to external controllers
(master keyboard, MIDI guitar, wind
controller, MIDI accordion…), to a
series of expanders, or to a computer
running a sequencer.
OUT
This connector sends MIDI data generated by Pa900’s keyboard,
controllers, and/or the internal player. Connect it to an
expander’s or computer’s MIDI IN.
IN
This connector receives MIDI data from a computer or a con-
troller. Connect it to an external controller’s or computers MIDI
OUT.
AUDIO OUT Section
Use these connectors to send the audio signal
(sound) to a mixer, a PA system, a set of pow-
ered monitors, or your hi-fi system.
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Korg PA900 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Korg PA900 in the language / languages: English as an attachment in your email.

The manual is 44,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info