707422
53
Zoom out
Zoom in
Previous page
1/73
Next page
49
Connecting an external MIDI sequencer or computer etc.
You can play the microKORG S's keyboard and record your performance on an
external MIDI sequencer/computer (connected via a MIDI interface), and then play
back the recorded performance to sound the microKORG S's tone generator (i.e.,
using the microKORG S as an input keyboard and MIDI tone generator). To do this,
connect the MIDI OUT and MIDI IN connectors of the microKORG S and your
external MIDI sequencer/computer to each other.
Some USB-MIDI interface devices may not be able to transmit/receive the
microKORG S's MIDI exclusive messages.
computer
MIDI IN
MIDI interface
MIDI INMIDI OUT
MIDI OUT
microKORG S
MIDI-related settings
MIDI channel setting
In order to exchange data with a connected external MIDI device, you must set the
microKORG S's MIDI channel to match the MIDI channel of the external MIDI
device.
1
Set the MIDI channel of the microKORG S.
Set the EDIT SELECT 2 dial to the MIDI position, and use knob 1 ("MIDI CH")
to set the MIDI channel.
(
p.51)
2
Set the MIDI channel of the connected external MIDI device.
(For information on setting the MIDI channel of the external MIDI device,
refer to the owner's manual of that device.)
MIDI "POSITION" setting
The microKORG S's MIDI "POSITION" lets you specify how MIDI IN/OUT will be
internally routed. This will affect how the MIDI data will be affected by the
"MASTER TRANSPOSE," "VELOCITY CURVE," OCTAVE SHIFT, and arpeggiator
settings. (p.47)
Normally when controlling an external MIDI tone generator from the
microKORG S, you will set "POSITION" to Post KBD (
). The various
settings listed above will affect the MIDI data that is transmitted.
The received data will be processed as "MASTER TRANSPOSE": 0, "VELOCITY
CURVE": Curve (
), and OCTAVE SHIFT: 0.
Normally when controlling the microKORG S's tone generator from an external
MIDI device, you will set "POSITION" to Pre TG ( ). The various settings
listed above will affect the MIDI data that is received (with the exception of
"OCTAVE SHIFT," which will be processed as 0).
The transmitted data will be processed as "MASTER TRANSPOSE": 0 and
"VELOCITY CURVE": Curve (
).
SHIFT function "MIDI FILTER" settings
You can specify whether program change, pitch bend, control change, and system
exclusive messages will be transmitted or received. (p.61)
SHIFT function "CONTROL CHANGE" settings
You can assign control change numbers to the major parameters that affect the
sound, and use an external MIDI device to perform the same operations as when
the knobs and keys of the microKORG S are operated. Conversely, you can operate
the microKORG S's knobs and keys to control an external MIDI device. (p.62)
MIDI "LOCAL" setting when connecting an external MIDI sequencer
or computer
If notes are sounding doubled when the microKORG S is connected to an external
MIDI sequencer or computer, turn the Local setting off (MIDI "LOCAL" OFF).
(p.51)
If the microKORG S is connected to an external MIDI sequencer or computer, and
the Echo Back setting of the external MIDI sequencer or computer is turned on
while the microKORG S's Local Control setting is also on, the performance data
generated when you play the microKORG S's keyboard will be sent to the external
MIDI sequencer, and will also be echoed-back to sound the microKORG S's tone
MIDI on the microKORG S
53


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Korg microKORG S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Korg microKORG S in the language / languages: English as an attachment in your email.

The manual is 6,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Korg microKORG S

Korg microKORG S User Manual - German - 73 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info