707422
54
Zoom out
Zoom in
Previous page
1/73
Next page
50
generator a second time. To prevent each note from being sounded twice, once
directly from the keyboard and once from the echoed-back note, you must turn the
microKORG S's Local Control setting off.
Recording the MIDI output from the microKORG S's arpeggiator onto
an external MIDI sequencer or computer
Connect the microKORG S's MIDI OUT connector to the MIDI IN connector of your
external MIDI sequencer / computer, and connect the microKORG S's MIDI IN
connector to the MIDI OUT connector of your external MIDI sequencer / computer.
(p.49)
Then turn the microKORG S's Local Control off (MIDI "LOCAL" OFF), and turn on
the echo back setting of your external MIDI sequencer / computer.
Recording the note data from the arpeggiator onto an external MIDI sequencer / com-
puter
Set the microKORG S's MIDI "POSITION" to Post KBD ( ).
Turn on the microKORG S's arpeggiator, play the keyboard, and record the note
data on your external MIDI sequencer / computer. If the MIDI "POSITION" is set to
Post KBD, the MIDI note data produced by the arpeggiator will be output from the
microKORG S, and recorded. (p.47)
Turn the microKORG S's arpeggiator off during playback.
Recording only the arpeggio-triggering notes on an external MIDI sequencer / com-
puter, and running the microKORG S's arpeggiator during playback
Set the microKORG S's MIDI "POSITION" to Pre TG ( ).
Turn on the microKORG S's arpeggiator, play the keyboard, and record the note
data on your external MIDI sequencer / computer. If MIDI "POSITION" is set to Pre
TG (
), only the notes you actually play on the keyboard will be transmitted as
MIDI data, and the MIDI note data generated by the arpeggiator will not be
transmitted. However, the MIDI note data echoed back from the external MIDI
sequencer / computer (whose echo back setting is turned on) will trigger the
microKORG S's arpeggiator, producing an arpeggio. (p.47)
Turn the microKORG S's arpeggiator on during playback.
Synchronizing the arpeggiator
The MIDI "CLOCK" setting specifies whether the microKORG S's arpeggiator will
be the master (the controlling device) or slave (the controlled device).
For information on synchronization-related settings of your external MIDI
device, refer to the manual of your device.
Using the microKORG S as master and the external MIDI device as slave
Connect the microKORG S's MIDI OUT connector to the external MIDI device's
MIDI IN connector (p.48). If you set MIDI "CLOCK" to Internal (
), the
microKORG S will be the master, and will transmit MIDI timing clock messages.
Make settings on your external MIDI device so it will receive external MIDI clock
data. The external MIDI device (sequencer, rhythm machine, etc.) will operate at the
tempo specified by the ARPEG.A "TEMPO" setting.
Using the external MIDI device as master and the microKORG S as slave
Connect the microKORG S's MIDI IN connector to the external MIDI device's MIDI
OUT connector (p.48). If you set MIDI "CLOCK" to External (
), the
microKORG S will be the slave.
The microKORG S's arpeggiator will operate at the tempo of the external MIDI
device (sequencer, rhythm machine, etc.).
If you set MIDI "CLOCK" to Auto ( ), the microKORG S will automatically
function using the External setting if MIDI clock is being received from an
external MIDI device connected to the MIDI IN connector. Otherwise, the
microKORG S will function using the Internal setting.
MIDI on the microKORG S
MIDI OUT
MIDI IN
GLOBAL: Master Transpose
FRONT PANEL: Octave
GLOBAL: Velocity Curve
Timbre 1
Timbre 2
Arpeggiator
Keyboard
MIDI OUT
MIDI IN
GLOBAL: Master Transpose
GLOBAL: Velocity Curve
FRONT PANEL: Octave
Timbre 1
Timbre 2
Arpeggiator
Keyboard
Figure 22-1
Figure 22-2
54


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Korg microKORG S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Korg microKORG S in the language / languages: English as an attachment in your email.

The manual is 6,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Korg microKORG S

Korg microKORG S User Manual - German - 73 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info