707348
147
Zoom out
Zoom in
Previous page
1/152
Next page
Messages Error and confirmation messages
141
was still underway after you wrote a program or other data
into internal memory.
The KROSS will automatically initialize itself in order to
repair the internal memory. This message will appear at
this time; press MENU(OK) button to close the dialog
box. In some cases, the preload bank data may be
temporarily initialized. As necessary, use the Global/
Media mode Load Preload/Demo Data command to load
the preload data into internal memory, or if you have
your own backup PCG, load it using Media mode.
T
There is no readable data
Meaning: Either the file size is 0 or the file does not contain
data that can be accessed by the load or open procedure.
Alternatively, the data is damaged etc., and cannot be loaded
or accessed.
The SD card is busy. Please stop the audio recorder and try
again.
Meaning: The audio recorder is accessing the SD card.
If the audio recorder is operating, stop the audio
recorder.
The SD card is busy. Please wait until the current
operation is complete.
Meaning:The SD card's “Automatic loading at start-up”
function or some other function is accessing the SD card or
the internal memory.
If the SD card access indicator is blinking, wait until it
stops blinking.
The song exists, and will be initialized
Meaning: When executing the Sequencer mode Create New
Song function, you attempted to create a new song for a song
number that already exists. If you execute, the song will be
initialized, and a new song will be created and overwritten
onto it.
If you don’t want to initialize the currently-existing song,
specify a new song number.
The system has been idle for more than **** and will shut
down in:
You can change the Auto Power-Off setting on the
following page: GLOBAL - PREF 1
Meaning: If there has been no operation for the specified
length of time of time, the Auto Power Off function will
display a message informing you that the power will turn off
soon. The power will turn off when the countdown time
indication reaches zero.
If you want to continue using the KROSS, press a key or
switch. Auto Power Off will be reset, and the same
message will appear when the specified length of time
has once again elapsed without any operation.
If you want to disable this function or change the time
setting, go to the GLOBAL> PREF 1 page and set the
Auto Power-Off parameter. Use the Write Global Setting
function to save the setting.
This title is already loaded
You attempted to load a EX-PCM option title that had
already been loaded.
U
Unable to save file.
Meaning: In Media mode when you save a file, the path
length including the name of the selected directory exceeded
76 characters.
Y
You can’t undo last operation. Are you sure?
Meaning: Once you enter event editing (even if you leave
event editing without actually editing an event), it will no
longer be possible to execute Compare to listen to the
previous edit. If you wish to enter event editing, press the
MENU (OK) button. To cancel, press the FUNCTION
(CANCEL) button.
You can’t undo this operation. Are you sure?
Meaning: When you exit recording or event editing in
Sequencer mode, the memory area for Undo (Compare
function) is not allocated. If you wish to keep the data that
was just recorded or edited, press the MENU (OK) button. If
you wish to return to the previous data (i.e., to delete the data
that was just recorded or edited), press the FUNCTION
(CANCEL) button.
Meaning: When editing in Sequencer mode, memory area
for Undo (Compare function) cannot be allocated. If you
wish to execute the edit, press the MENU (OK) button (It
will not be possible to undo your edit). If you decide not to
execute the edit, press the FUNCTION (CANCEL) button.
In order to allocate memory area for Undo (Compare
function), delete unneeded data such as songs, or tracks.
We recommend that you data to media before you
execute the edit procedure.
You can use “Quick Setting” with [EXIT]+[ENTER]
Meaning: In the Audio In page of Program, Combination, or
Sequencer modes, this is shown at the bottom of the screen
when the G-SET check box On setting is selected. At this
time, the Audio In settings use the settings of the Global/
Media mode G-INPUT/CTRL>AUDIO IN page. To apply
these settings easily, hold down the EXIT button and press
the ENTER button to open the Audio In - Quick Setting
dialog box for G-SET.
147


Need help? Post your question in this forum.

Forumrules
1

Forum

korg-kross-2

Reset search

  • During last night's gig, my Kross 2 started changing "Favorites" - one after the other - switching through the banks and sounds, while I was playing. What could cause that. It didn't do it all the time, just every now and then at random. Submitted on 4-9-2022 at 00:59

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Korg Kross 2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Korg Kross 2 in the language / languages: English as an attachment in your email.

The manual is 4,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Korg Kross 2

Korg Kross 2 User Manual - German - 152 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info