707348
145
Zoom out
Zoom in
Previous page
1/152
Next page
Messages Error and confirmation messages
139
I
Illegal file description
Meaning: You used an invalid file name when attempting to
save or export a file.
Change the filename you are specifying. Filenames not
permitted by MS-DOS cannot be used as a filename.
Illegal SMF data
Meaning: You attempted to load a file that was not a
Standard MIDI File.
Illegal SMF division
Meaning: You attempted to load a Standard MIDI File that
was timecode-based.
Illegal SMF format
Meaning: You attempted to load a Standard MIDI File of a
format other than 0 or 1.
In MEDIA pages, the audio recorder is not available.
Meaning: You can't operate the audio recorder while in the
MEDIA page.
Response: Move to a different page.
M
Measure number over limit
Meaning: The attempted edit procedure would cause the
track length to exceed 999 measures.
Delete unnecessary measures.
Measure size over limit
Meaning: When loading a Standard MIDI File, the number
of events in a measure exceeded the maximum
(approximately 65,535 events).
Meaning: The attempted edit procedure would cause the
maximum number of events in a measure (approximately
65,535) to be exceeded.
To solve either of these problems:
Use event editing etc. to delete unwanted data.
Media busy
Meaning: SD card access was not fast enough to keep up
with recording or playback.
As you repeatedly delete and write files, the file access
efficiency may decline. In this case, you may be able to
improve the situation by copying the KORG folder from
the SD card to your computer, then formatting the SD
card on the KROSS, and finally writing the KORG
folder from your computer back to its original location.
If this does not improve the situation, switch to a
different SD card.
Media not formatted
Meaning: The media is unformatted.
In the Media mode Utility page, execute the Format
function on the media.
Media unavailable
Meaning: You selected a media source that does not allow
writing.
Media write protected
Meaning: The audio recorder or Media mode is attempting
to write data to media that is write-protected.
Disable the write protect setting of the media, and
execute the audio recorder operation or the command
once again.
Memory full
Meaning: When editing a song, or track in Sequencer mode,
the total data of all songs has used up all of the sequence data
memory, and further editing is not possible. To solve this
problem:
Delete other song data etc. to regain free memory.
Meaning: While realtime recording in Sequencer mode,
there is no more free memory to accommodate the recorded
data, so recording has been forcibly halted. To solve this
problem:
Delete other song data etc. to regain the amount of free
memory.
Memory Protected
Meaning: The internal program, combination, song, drum
kit, user arpeggio pattern is protected.
In Global/Media mode, turn off write-protect, and
execute the write or load procedure once again.
MIDI data receiving error
Meaning: While receiving MIDI System Exclusive data, the
format of the received data was invalid, for example,
because the size of the data was incorrect.
N
No data
Meaning: When loading a Standard MIDI File, the file
contained no events.
No media
Meaning: When using the audio recorder or when executing
a Global/Media mode command, the target SD card was not
inserted.
Insert SD card, and navigate to an appropriate directory
that the KROSS will recognize.
No recording track specified
Meaning: When performing realtime multi-track recording,
you attempted to begin recording with no tracks set to REC.
To solve this problem:
Set the desired tracks for recording to REC.
No space available on media
Meaning: When saving or exporting a file, there was
insufficient space on the media.
Either delete an existing file, or replace the media with
another that contains sufficient free space.
No updating was required at this time. The KROSS already
has the latest version of the system files.
Meaning: When executing the Global/Media mode Update
System Software function, the update was not necessary
because the system is already the most recent version.
Not enough memory
Meaning: When starting realtime recording in Sequencer
mode, the minimum amount of free memory (such as
memory for the BAR events up to the recording start
location) could not be allocated. To solve this problem:
Delete other song data etc. to regain free memory.
145


Need help? Post your question in this forum.

Forumrules
1

Forum

korg-kross-2

Reset search

  • During last night's gig, my Kross 2 started changing "Favorites" - one after the other - switching through the banks and sounds, while I was playing. What could cause that. It didn't do it all the time, just every now and then at random. Submitted on 4-9-2022 at 00:59

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Korg Kross 2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Korg Kross 2 in the language / languages: English as an attachment in your email.

The manual is 4,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Korg Kross 2

Korg Kross 2 User Manual - German - 152 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info