707348
111
Zoom out
Zoom in
Previous page
1/152
Next page
Convenient functions for playback and recording Loop playback
105
2. Press the AUDIO REC (play/pause) button to
start playback. (AUDIO REC (play/pause)
button: lit green)
3. Slightly earlier than the point where you want to start
overdubbing, press the MENU (Rec Control )
button to enter the record-standby condition.
(AUDIO REC (play/pause) button: blinking
orange)
4. Sing the chorus part. Recording will start
automatically in response to the input.
When you overdub using this method, the audio input from
0.2 seconds earlier than the moment you started recording
will actually be recorded. This lets you overdub without
losing the beginning of the chorus or guitar phrase.
Tip: This Auto (Auto Rec Start) setting can be stored in the
GLOBAL> PREF 2 page as the default setting.
Loop playback
There’s a loop playback function that lets you repeatedly
play a specified region (A–B) of an audio song.
Note: The loop play on/off setting and the specified time are
saved individually for each audio song.
This setting will be saved to the SD card when you
switch to a different audio song or when you turn off the
power. If you remove the SD card immediately after
select the setting, the setting will not be saved.
Using loop play
If you add a check mark to LOOP to turn it on, the playback
will loop.
To specify the loop region, set the point where looping will
start (point A) and end (point B).
Note: The interval between points A and B will be at least
three seconds.
It’s not possible to record while LOOP has a check
mark. Nor is it possible to add a check mark to LOOP
during recording.
Setting the current time location as a point
There’s a convenient function that lets you directly specify
the current time location as one of the points. Move the cursor
to A or B, and press the ENTER button during playback; the
current time location will be specified as a point.
Note: If you use this method to specify the time location of a
point, the location will be specified with an accuracy of
within one second.
Pad audio play
You can assign a recorded audio song to a pad and play it
back. ( p.109)
Importing or exporting WAVE files
Importing
You can import a WAVE file into the audio recorder, and
play it or overdub onto it.
The following files can be imported.
File format: WAVE format uncompressed linear PCM
Sample bit depth: 16-bit
Sampling frequency: 44.1 kHz or 48 kHz, stereo files
Number of characters in file name: The first eight characters
are shown
Note: Since 44.1 kHz WAVE files will be converted into 48
kHz as they are imported into the KROSS, a small amount of
time may be required.
Import procedure
1. Using your computer, copy the WAVE file that you
want to import into the KORG/KROSS2/DATA folder
of an SD card that was formatted by the KROSS.
2. In the audio recorder setup screen, open the audio
song list.
3. The WAVE file that you saved on the SD card in step 1
is shown at the bottom; select the WAVE file that you
want to import, and press ENTER to access the dialog
box.
Note: As an alternative to steps 2 and 3, you can open the
same dialog box by using the MEDIA>FILE page to
select the WAVE file that you want to import, and then
executing the Load Selected function.
4. If you want to rename the song, access the text dialog
box and enter a name.
5. If the volume of the file you’re importing should be
adjusted beforehand, specify Level Adjust.
Note: After importing, you can adjust the playback
volume of the audio recorder, or apply an individual
volume adjustment to each audio song. (see “Adjusting
the volume” on page 106)
6. Press the MENU (OK) button to execute the import
function.
The selected WAVE file will be loaded in KROSS audio
song format. The progress of execution is shown by a
progress bar in the display.
Note: This may take some time depending on the type of
file, etc.
During the import procedure, you can cancel by pressing
the FUNCTION (ABORT) button.
7. In the audio recorder setup window, select the song
that you imported, and play it.
111


Need help? Post your question in this forum.

Forumrules
1

Forum

korg-kross-2

Reset search

  • During last night's gig, my Kross 2 started changing "Favorites" - one after the other - switching through the banks and sounds, while I was playing. What could cause that. It didn't do it all the time, just every now and then at random. Submitted on 4-9-2022 at 00:59

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Korg Kross 2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Korg Kross 2 in the language / languages: English as an attachment in your email.

The manual is 4,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Korg Kross 2

Korg Kross 2 User Manual - German - 152 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info