707348
110
Zoom out
Zoom in
Previous page
1/152
Next page
Audio recorder
104
Play the keyboard of the KROSS or input audio from the
MIC IN or LINE IN jacks.
5. To stop recording, press the PAGE+ (Stop/Reset )
button (AUDIO REC (play/pause) button:
unlit).
If you press the MENU (Rec Control ) button during
recording, recording will end, playback will continue,
and the location will advance. To resume recording, press
the MENU (Rec Control ) button.
To start recording in synchronization with your
performance or input
You can make recording start automatically when you begin
playing the keyboard or when external audio input is
received.
Select the appropriate Auto setting and press the MENU
(Rec Control) button; AUDIO REC (play/pause)
button will blink orange, and the recorder will be in the
record-standby condition. Recording will start automatically
when you play the keyboard or input audio. (see “Specifying
how recording will start”)
Preparing a new audio song
1. Press the FUNCTION (FUNC) button to access the
function list.
2. Use the PAGE– () button to select Create New
Audio Song, and then press the MENU (OK) button.
The Create New Audio Song dialog box will appear.
3. To assign a name to the song, press the ENTER
button, enter a name in the text dialog box, and then
return to this dialog box (see page 124). You can
change the name later.
4. Press the MENU (OK) button to create the new audio
song.
On the upper left side of the display, the Audio Track will
indicate “NEW” to show that this is a new song where
nothing has been recorded.
Convenient functions for
playback and recording
Returning to the state before or after
recording (Undo/Redo)
If you’re not satisfied with your performance and would like
to record it again, you can use the Undo function to return to
the state prior to recording. You can also step back through
multiple takes. If you want to cancel the Undo function, use
Redo.
1. To cancel the recording, press the PAGE– (UNDO)
button.
The UNDO dialog box will appear.
2. Specify the take that you want to use from the
previously-recorded takes, and press the OK button.
When you execute UNDO, the PAGE– (UNDO)
button will be highlighted.
Note: If you record in this state, the Redo data will be lost
and the PAGE– (UNDO) button will return to its original
appearance.
Specifying how recording will start
Use the Auto (Auto Rec Start) setting to specify how
recording will start automatically. You can make recording
start the moment you play a note on the keyboard, or when
the sequencer starts, or when the audio input signal reaches a
specific level.
1. In the audio recorder setup window, set Auto (Auto
Rec Start). For details, please see step 3.
2. Press the MENU (Rec Control ) button to enter
the record-standby condition. (AUDIO REC
(play/pause) button: blinking orange)
3. Off: Press the MENU (Rec Control ) button or the
AUDIO REC (play/pause) button
to start
recording.
Note-On: Recording will start when you play the
keyboard.
SEQ START: Recording will start when you press the
SEQUENCER (start/stop) button.
Input Low: Recording will start when the audio input
level exceeds approximately –18 dB.
Input High: Recording will start when the audio input
level exceeds approximately –6 dB.
Note: It’s convenient to record using the following method if
you want to overdub an external input such as a guitar solo
or chorus onto a portion of the audio song.
1. Set Auto (Auto Rec Start) to Input Low or Input High.
Adjust input settings for Mic In.
Multi-track
recording
start location
Multi-track
recording
end location
Multi-track
recording
start location
Multi-track
recording
end location
Record-pause
Press the REC
Control button
Press the REC
Control button
Record-pause
Record-pause
Press the REC
Control button
Press the Stop/Reset button
Record-pause
Move manually
Stop playback
(return to start location)
Start playback
Continue playback
Play back and record only the multitrack-recorded region
Multi-track record while playing the entire song
110


Need help? Post your question in this forum.

Forumrules
1

Forum

korg-kross-2

Reset search

  • During last night's gig, my Kross 2 started changing "Favorites" - one after the other - switching through the banks and sounds, while I was playing. What could cause that. It didn't do it all the time, just every now and then at random. Submitted on 4-9-2022 at 00:59

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Korg Kross 2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Korg Kross 2 in the language / languages: English as an attachment in your email.

The manual is 4,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Korg Kross 2

Korg Kross 2 User Manual - German - 152 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info