Manual Korg Kross 2 (page 54 of 152) (English)

707348

Zoom out

Zoom in

1/152

Playing and editing Combinations

A suggested approach for editing

First select the program that each timbre will use, and set

each timbre’s MIDI channel to Gch (global MIDI channel)

and its Status to INT so that it can be played from the

keyboard.

Next, create any desired keyboard or velocity switch, layers,

or crossfades between the different Timbres.

After this, adjust the volumes of the Timbres, and set up any

other Timbre parameters as desired.

To add finishing touches to the sound, set up the Insert, and

Master Effect as desired. These effects can be different from

those associated with the individual Programs in Program

mode, if desired.

In addition, you can make arpeggiator and drum track

settings and controller settings to create the finished

Combination.

Note: You can use a function to copy effect and arpeggiator

settings from a program. (see page 96 of the Parameter

Guide)

Soloing a timbre

You can use the COMBI> PROG page Solo Setting function

to hear the sound of an individual timbre. (see page 32)

Comparing with the sound before

you started editing

Using COMPARE

When you’re in the process of editing a sound, pressing the

COMPARE button will recall the saved version of the sound,

as it was before you started editing.

For details, please see “Compare/Undo function” on

page 13.

Changing the program of each

timbre

Changing the Programs that are assigned to timbres (1–16) is

a quick way to dramatically alter the sound of the

Combination.

1. Access the COMBI> PROG page.

Press the PAGE+ or PAGE- button to select the page.

2. Press the cursor button ▼ to choose category/timbre

program select (it will be highlighted).

3. Use the cursor buttons ◄► to select the timbre whose

program you want to switch.

4. Turn the CATEGORY dial to select a category.

5. Turn the VALUE dial.

6. Press the MENU (OK) button or the ENTER button

to confirm your choice.

You can also switch programs by receiving MIDI

program changes from a connected external MIDI

device. (see page 316 of the Parameter Guide)

To select the timbre program via MIDI program change

the timbre’s status must be set to “INT.”

Adjusting the mix

Adjusting the volume of each timbre

1. Access the COMBI> MIXER page.

Press the PAGE+ or PAGE– button to select the page.

In this page you can view and edit the pan and volume of

timbres 1–16.

2. Press the cursor button ▼ to choose Volume (it will be

highlighted).

3. Use the cursor buttons ◄► to select the timbre whose

volume you want to adjust

4. Use the VALUE dial etc. to adjust the setting.

Note: If you check Hold Balance function, moving any one

of the volume sliders (volume values) will cause the volume

of the other timbres to change as well, maintaining the

relative volume balance between timbres 1–16. This is a

convenient way to adjust the overall volume.

Adjusting the panning of each timbre

1. Access the COMBI> MIXER page.

2. Use the cursor buttons ▲▼ to choose Pan (it will be

highlighted).

3. Use the cursor buttons ◄► to select the timbre whose

pan you want to adjust

4. Use the VALUE dial etc. to adjust the setting.

Note: Timbre pan interacts with the pan stored in the

Program. A setting of C064 reproduces the Program’s

oscillator pan settings. Adjusting the Timbre Pan will move

the sound to left or right while preserving the pan

relationship between the oscillators. A setting of L001 is far

left, and R127 is far right.

Timbre number

Category/combination select

Category/timbre program select

Active timbre

STEP(Step sequencer on/o)

SMP(Pad sampler on/o)

During last night's gig, my Kross 2 started changing "Favorites" - one after the other - switching through the banks and sounds, while I was playing. What could cause that. It didn't do it all the time, just every now and then at random. Submitted on 4-9-2022 at 00:59
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Korg Kross 2 in the language / languages: English as an attachment in your email.

The manual is 4,35 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Korg Kross 2

Korg Kross 2 User Manual - German - 152 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Korg Kross 2 Manual

Product: