707348

Korg Kross 2 Manual

48
Zoom out
Zoom in
Previous page
1/152
Next page
Playing and editing Programs
42
Resonance
Resonance emphasizes the frequencies around the cutoff
frequency, as shown in the diagram below.
When this is set to 0, there is no emphasis, and frequencies
beyond the cutoff will simply diminish smoothly.
At medium settings, the resonance will alter the timbre of the
filter, making it sound more nasal, or more extreme. At very
high settings, the resonance can be heard as a separate,
whistling pitch.
To make the resonance track the keyboard pitch, please see
“Key Follow” on page 27 of the Parameter Guide.
Modulating the filters
You can modulate the filter cutoff frequency using the Filter
EG, the LFOs, keyboard tracking, and other built-in and
MIDI controllers. This is a great way to add a rich variety of
tonal change to the sound.
Filter EG
The Filter EG is a multi-stage envelope, which you can use
to modulate the filter as well as other Program parameters.
The EG itself is set up on the P-FILTER EG> ENVELOPE
page; the way that it affects the filters is controlled by the
parameters described below, on the P-FILTER> EG-I
(Intensity) page.
The Intensity to A and Intensity to B settings control the
basic amount of EG modulation for filter frequencies A and
B, respectively, before other modulation.
The Veloci ty to A and Veloc ity to B settings let you use
velocity to control the amount of EG modulation.
The Filter EG AMS setting selects an AMS modulation
source to scale the amount of the Filter EG that’s applied to
Filters A and B. The two filters share a single AMS source,
with separate intensity A or B settings.
LFO modulation
You can modulate the filter via LFO1, LFO2, and the
Common LFO. Among other applications, LFO modulation
of the filter can produce the classic “auto-wah” effect.
The P-FILTER> LFO-I (Intensity) page lets you set up the
following parameters separately for each LFO:
Intensity to A and Intensity to B specify how much the
LFO changes the tone.
The AMS setting selects an AMS modulation source to scale
the amount of the LFO applied to Filters A and B. The two
filters share a single AMS source, with separate intensity
settings.
For example if AMS is set to SW1: #80, turning SW1 on
will apply an auto-wah effect. (see page 40)
Keyboard Track
Most acoustic instruments get brighter as you play higher
pitches. At its most basic application, keyboard tracking re-
creates this effect by increasing the cutoff frequency of a
lowpass filter as you play higher on the keyboard. Usually,
some amount of key tracking is necessary in order to make
the timbre consistent across the entire range.
The KROSS keyboard tracking can also be much more
complex, since it allows you to create different rates of
change over up to four different parts of the keyboard. For
instance, you can:
• Make the filter cutoff frequency increase very quickly
over the middle of the keyboard, and then open more
slowly–or not at all–in the higher octaves.
• Make the cutoff frequency increase as you play lower on
the keyboard.
• Create abrupt changes at certain keys, for split-like
effects.
How Key Track works: Keys and Ramps
The keyboard tracking works by creating four ramps, or
slopes, between five keys on the keyboard.
For details, please see “How it works: Keys and Ramps” on
page 26 of the Parameter Guide.
Low resonance
High resonance
… 48 …


Need help? Post your question in this forum.

Forumrules
1

Forum

korg-kross-2

Reset search

  • During last night's gig, my Kross 2 started changing "Favorites" - one after the other - switching through the banks and sounds, while I was playing. What could cause that. It didn't do it all the time, just every now and then at random. Submitted on 4-9-2022 at 00:59

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Korg Kross 2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Korg Kross 2 in the language / languages: English as an attachment in your email.

The manual is 4,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Korg Kross 2

Korg Kross 2 User Manual - German - 152 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info