500314

Korg ESX-1 Manual

91
Zoom out
Zoom in
Previous page
1/108
Next page
91
7. Global mode
Each drum part knob can be edited using NRPN
MIDI messages.
About note-on/note-off
When you press a drum part key, a note-on mes-
sage of the note number assigned to each drum part
key will be transmitted on the specified MIDI chan-
nel.
When you use the Keyboard function to play the
step keys, a note-on message [9n, kk, vv] (n: chan-
nel, kk: note number, vv: velocity) of the note num-
ber assigned to each step key and a velocity value
corresponding to the strength with which you
pressed the key will be transmitted.
On the ESX-1, the vv:velocity value is adjusted by
the level of each accent part. When you release a
key, a note-off message [8n, kk, vv] will be trans-
mitted. However, very few devices receive note-
off velocity data, and the ESX-1 does not transmit
it. When the ESX-1 receives note-on/off messages
on the MIDI channel assigned for a part, that part
will be sounded.
If the ESX-1’s MIDI filter “N” setting is set to “x,”
note-on/off messages will not be transmitted or re-
ceived. (☞p.90 “Making MIDI filter settings”)
Assigning a MIDI Control
Change Number to a knob
#CC ASSIGN ................ CC#00...31,32...127
You can specify the MIDI control change number
assigned to each knob.
1. Press the Global key.
2. Hold down the SHIFT key and press step key 15
(MIDI UTILITY). (Key 15 will blink.) The param-
eter display will indicate “MIDIUtil.”
3. Turn the dial to change the value display to
“CCAsin,” and press key 15.
4. The parameter display will read “CCAssign,” and
the value display will show “(the name of the cor-
responding knob).” Turn the dial to select the knob
whose assignment you want to change, and press
key 15.
5. The parameter display will read “CCNumber,” and
the value display will show “(a control change
number).” Turn the knob to select the desired con-
trol change number and press key 15.
6. Press step key 15 and the display will ask “Con-
tinue?” If you want to make settings for another
knob, use the dial to select “Yes” and press step
key 15. Then repeat steps 4 and 5.
If you are finished making settings, use the dial to
select “No” and press step key 15 to return to Glo-
bal mode.
If you decide to cancel, press the STOP/CANCEL
key or press any mode key.
Support for control change numbers will be differ-
ent for each manufacturer. Refer to the manual of
the device you want to connect.
… 91 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Korg ESX-1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Korg ESX-1 in the language / languages: English as an attachment in your email.

The manual is 3,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info