500314

Korg ESX-1 Manual

90
Zoom out
Zoom in
Previous page
1/108
Next page
90
MIDI Utility
Here you can make MIDI filter settings, assign drum note
numbers, assign control change numbers, and transmit/
receive MIDI data.
Making MIDI filter settings
MIDI FILTER ...................................................
You can select which MIDI messages the ESX-1 will
receive and transmit.
1. Press the Global key.
2. Hold down the shift key and press step key 15
(MIDI UTILITY) (key 15 will blink). The param-
eter display will indicate “MIDI Util.”
3. Make sure that the value display indicates “Filter,”
and press key 15.
4. The parameter display will read “PCEN.”
The characters “PCEN” correspond to four types
of message whose status is indicated by an “O” or
“X” in the value display. If you want a category of
message to be transmitted/received, set its status
to “O.” If you don’t want that category of message
to be transmitted/received, set its status to “X.”
Turn the dial to select “O” or “X” for each category
of message.
P: Program change, bank select, and song
select transmission/reception.
C: Control change transmission/reception.
E: Exclusive data transmission/reception.
However while the MIDI Dump page is
displayed, this data can always be re-
ceived regardless of this setting.
N: Note message transmission/reception.
5. When you have finished making settings, press the
15 key to return to Global mode. (Key 15 will go
dark and the Global mode key will light.) If you
decide to cancel, press the STOP/CANCEL key or
press a mode key.
Assigning the drum note numbers
DRUM NOTE NO. ........................... C-1...G9
You can assign a MIDI note number (as a note
name) for each drum part. If you assign the same
note number for two or more parts, those parts will
sound simultaneously when controlled from an
external MIDI device.
1. Press the Global key.
2. Hold down the shift key and press step key 15
(MIDI UTILITY) (key 15 will blink). The param-
eter display will indicate “MIDI Util.”
3. The value display will indicate “Filter.” Turn the
dial to change this to “DrNote,” and press key 15.
4. Press the drum part key whose note number you
want to assign.
5. The parameter display will show the name of the
selected drum part, and the value display will in-
dicate the corresponding number.
Turn the dial to select the desired note number. For
each drum part that you want to assign, repeat the
steps of selecting the drum part and then selecting
a note number.
6. When you have finished making settings, press key
15 to return to Global mode. (Key 15 will go dark and
the Global key will light.) If you decide to cancel, press
the STOP/CANCEL key or press a mode key.
With the factory settings, the drum note numbers
are assigned as follows.
Part Note
Drum1 C2
Drum2 D2
Drum3 E2
Drum4 F2
Drum5 G2
Drum6A F
2
Drum6B A
2
Drum7A C
3
Drum7B D
3
Stretch1 A-1
Stretch2 A#-1
Slice B-1
Audio in C0
The correspondence between note names and note
numbers may differ for devices of different manu-
facturers. Please check this correspondence for the
device you are connecting.
… 90 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Korg ESX-1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Korg ESX-1 in the language / languages: English as an attachment in your email.

The manual is 3,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info