500314
61
Zoom out
Zoom in
Previous page
1/108
Next page
61
5. Pattern mode
Editing the trigger locations (the location of the notes)
1. Press the PATTERN key or PART EDIT key (it will light).
2. Press the keyboard part key that you want to edit. (The key will
light.)
3. Turn the KEYBOARD key off (dark).
4. The step keys will indicate the trigger locations for the phrase pat-
tern of the part you selected.
5. Press a step key to change the trigger setting for the corresponding
location. Each time you press a step key, the trigger will be switched
alternately on (lit) or off (dark).
When the display indicates "Motvalue," "GateTime," "NoteNo.", or
"Step Rec," pressing a step key will not change the trigger on/off
setting.
Editing the note number (pitch)
NOTE NO. ................................................................ C-1...G9
1. Press the STEP EDIT key (it will light).
2. Use the [ ][ ] cursor keys to select “NoteNo” in the display.
3. Press the keyboard part key that you want to edit. (The key will
light.)
4. Turn the KEYBOARD key off (dark).
5. The step keys will indicate the trigger locations for the phrase pat-
tern of the part you selected.
6. Press the step key for the location whose note number you want to
edit (the key will blink).
7. Turn the dial to change the note number for that step. Alternatively,
you can turn the KEYBOARD key on, and press a step key to specify
the desired note number. If you then want to specify a different tar-
get step for editing, turn the KEYBOARD key off temporarily.
While the display indicates “Note No., pressing the step keys will
not switch triggers on/off.
Even if you edit the note number of a step whose trigger is off, it will
not sound until you turn the trigger on.
Editing the gate time
GATE TIME .......................................................... 0.25...128.0
1. Press the STEP EDIT key (it will light).
2. Use the [ ][ ] cursor keys to select “GateTime” in the display.
3. Press the keyboard part key that you want to edit. (The key will
light.)
4. Turn the KEYBOARD key off (dark).
5. The step keys will indicate the trigger locations for the phrase pat-
tern of the part you selected.
6. Press the step key for the location whose gate time you want to edit
(the key will blink).
7. Turn the dial to change the gate time for that step. The value shown
in the display is the gate time length in units of a step. For example,
a gate time setting of “1.0” means that the gate time will be exactly
as long as one step.
If the gate time length extends into the timing of the next note, the
next note will be played legato; the oscillator, EG, and modulation
will not be retriggered.
While the display indicates the gate time, pressing the step keys will
not switch triggers on/off.
Even if you edit the gate time of a step whose trigger is off, it will not
sound until you turn the trigger on.
61


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Korg ESX-1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Korg ESX-1 in the language / languages: English as an attachment in your email.

The manual is 3,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info