Manual Korg ESX-1 (page 59 of 108) (English)

500314

Zoom out

Zoom in

1/108

5. Pattern mode

To erase unwanted triggers during playback (Erase)

While playing back, you can hold down the SHIFT key, and press

and hold the RESET/ERASE key to erase triggers that occur during

that time for the selected part (whose key is lit).

Step recording

The step recording procedure will differ depending on whether you are creating

a keyboard part phrase or a drum part rhythm.

When you press a drum part key, the Keyboard function of the step

keys will be defeated, but the Keyboard function will return to its

previous setting when you select a keyboard part once again.

To record a rhythm for a drum part, slice part, stretch part, accent part

1. Press the PATTERN key (it will light).

Press the [ ] cursor key several times until the display reads “(pat-

tern name ).” Turn the dial to select the pattern you want to record.

2. Press the drum part key of the part you want to record. (The key

will light.)

3. Use the select keys to select which area of the pattern you want to

edit. The lower line of LEDs will indicate the area in which you will

be editing. For example, if the pattern to be edited has a length of

“2” and you wish to edit the second half of the pattern, you would

use the select keys to advance the red led to the “2” position.

4. The step keys will light to indicate the rhythm of the selected pat-

tern. You can press the step keys to change the rhythm of the pat-

tern. Each time you press a step key, it will alternate between on (lit)

and off (dark). You can make these changes even during playback.

Drum parts 6A and 6B, and 7A and 7B, cannot be played simulta-

neously. If both ‘A’ and ‘B’ are triggered simultaneously, only ‘B’ (i.e.,

6B or 7B) will sound.

To record a phrase for a keyboard part

If the ESX-1 is playing, press the STOP/CANCEL key to stop playback.

2. Press the PATTERN key (it will light).

Press the [ ] cursor key until the display reads “(patter n name ).”

Turn the dial to select the pattern that you want to record.

3. Press the keyboard part key of the part you want to record. (The key

will light.)

4. Turn the KEYBOARD key on (lit).

5. Press the STEP EDIT key, and then press the [ ] cursor key until the

display reads “Step Rec.” The display will show the target step.

Turn the dial to select the target step at which you want to begin recording.

7. Press the REC key to enter record-ready mode.

At this time, playback will not start even if you press the PLAY key.

8. Use the step keys to input the pitches of the phrase one by one. When

you input a pitch, the target step (the step to be edited) will auto-

matically advance to the next step.

9. Recording will end when you input the last step or press the STOP/

CANCEL key. (The REC key will go dark.)

To input a rest or tie

Press the REST/TIE key to input a rest.

To enter a tie, hold down the step key and press the REST/TIE key.

To move the target step

First select the step that you want to edit. This step is called the

“target step.”

While recording, you can turn the dial to move the target step for-

ward or backward one step at a time. You can also move between

steps by holding down the SHIFT key and using the select keys.

2 5

Step keys

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Korg ESX-1 in the language / languages: English as an attachment in your email.

The manual is 3,74 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Korg ESX-1 Manual

Product: