488490
14
Zoom out
Zoom in
Previous page
1/23
Next page
14
4. Appendices
4. Appendices
Adjusting the expression pedal
(Calibration)
If you find the expression pedal difficult to use,
perform this procedure so that the pedal will function
optimally. For example if the effect does not reach
maximum when the pedal is advanced all the way, or
does not reach minimum when the pedal is returned
all the way, use the following procedure to make the
appropriate adjustments.
When making adjustments, use your hand to move the
pedal. Accurate calibration may not be possible if you use
your foot to operate the pedal.
1. Turn on the power while simultaneously holding
down the EXIT switch and the PEDAL effect block
select switch.The name display will show “PEDAL
for approximately one second, and will then
indicate “MIN.”
2. Slowly return the pedal to the full back position.
When it stops, release your hand and press the
WRITE key.The name display will change from
MIN” to “MAX.”
If you decide to halt the adjustment procedure, press the
EXIT switch. The power-on display will appear, and you
will enter Play mode.
3. Slowly advance the pedal. When it stops, release
your hand and press the WRITE key.
2. Press slowly
3. Press slowly
The LCD display will indicate “COMPLT” for
approximately one second. Then the power-on display
will appear, and you will enter Play mode.
After the adjustment procedure has been completed,
verify the operation of the pedal.
Select an effect that will make it easy to verify the
adjustment. For example, set the pedal effect block to
the VOLUME effect, set the value to 0, and check the
MIN level when the pedal is returned all the way.
If you make a mistake during the calibration procedure,
the LCD will indicate ERROR, and you will return to the
screen before the adjustment (the MIN display). If the
ERROR display appears for repeated attempts, a
malfunction may have occurred. In this case, please
contact your dealer.
Restoring the user programs to
the factory settings (Reload)
1. Turn on the power while simultaneously holding
down the EXIT switch and the bank switch. The
name display will indicate “RELOAD?
If you press the EXIT switch, the reload operation will not
occur; the power-on display will appear, and you will
enter Play mode.
2. Press the WRITE switch. The name display will
change to “RELOAD,” and the reload operation
will begin. When the reload operation is completed,
the display will indicate “COMPLT” for approxi-
mately one second. Then the power-on display will
appear, and you will enter Play mode.
Never turn off the power during the reload operation.
When you perform the reload operation, all user
programs will be rewritten. Master level, metronome, and
input level settings will also be initialized.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Korg AX1000G at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Korg AX1000G in the language / languages: English as an attachment in your email.

The manual is 1,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info