508723
11
Zoom out
Zoom in
Previous page
1/31
Next page
SPEED DOME CAMERA 

OPERATION INSTRUCTION
Speed dome can be driven through combination of hot keys on a keyboard controller. It can also be driven
through OSD menu. OSD menu can be activated by preset #95 call or double calling preset 1 (call twice within 5
seconds). Preset calling can be done through a keyboard controller or any other device (e.g. a computer ) that
can send proper command to the speed dome.
OSD menu operations are specified as follow:
PREHEATING SCREEN
When power on the dome and system temperature is
under -15C/5F
following screen shows up:
Outer Temp :-030C/-022F
System Temp: -020C/-004F
Fan Speed :6480rpm
System Under
-15C/5F
System Heating Up
Please Wait……
System heats up till the system temperature is above
-15C/5F. System starts to boot up after heating up
finishes.
< Outer Temp >
Environment temperature XXC/XXF C
Celsius
F
Fahrenheit
< System Tem >
System inner temperature
< Fan Speed >
The rotating speed of fan.
BOOT-UP SCREEN
When power on or restart the dome, the boot up
information will display on screen and then the dome
will conduct self-testing. “System booting up…” will
show on the screen until “boot-up success” shows up.
The whole boot up process lasts about 40 seconds.
This screen display disappears once the dome receives
any effective command.
Protocol : Ernitec
Baud Rate : 4800BPS
Camera ID : 001
Camera S/N : 8888888888
Model : -------------
Version : 1.20
Outer Temp :022C/071F
System Tem:027C/080F
Fan Speed :6480rpm
Booting Up…
Pt l
Dome control protocol.
<Baud Rate>
Dome control baud rate
<Camera ID>
The dome ID address set by dip-switch or
keyboard. (See APPENDX I)
<Camera S/N>
Camera serial number
<Model>
Speed dome model number.
<Version>
Hardware and software version
Protocol : Ernitec
Baud Rate : 4800BPS
Camera ID : 001
Camera S/N : 8888888888
Model : -------------
Version : 1.20
Outer Temp :022C/071F
System Tem:027C/080F
Fan Speed :6480rpm
Bootup Success
ACCESSING MAIN MENU
Display the dome’s main menu on your monitor
by calling preset 95 or calling preset 1 twice
within 5 seconds.
Note: For third party keyboard controller please
read manuals. As command to a preset may not
be the same among different manufacturers.
In case password protection is in effect, user
needs to input the correct 6-bit password to
enter the OSD menu. (Default password is
123456).
To enter password, move the joystick up or
down to select number (0-9), move the joystick
left or right to choose password digit. If the
input password is wrong, the password input
window will disa
pp
ear.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Konig Electronic SEC-CAM901 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Konig Electronic SEC-CAM901 in the language / languages: English as an attachment in your email.

The manual is 2,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info