731304
6
Zoom out
Zoom in
Previous page
1/80
Next page
66
English
Cleaning and maintenance
Warning!
Before cleaning or maintenance, switch o the device, remove
the mains plug from the wall socket and wait until the device
has cooled down.
Do not use cleaning solvents or abrasives.
Do not attempt to repair the device. If the device does not
operate correctly, replace it with a new device.
Clean the outside of the device using a soft, damp cloth.
Thoroughly dry the outside of the device with a clean, dry cloth.
Safety
General safety
Read the manual carefully before use. Keep the manual for
future reference.
Only use the device for its intended purposes. Do not use the
device for other purposes than described in the manual.
Do not use the device if any part is damaged or defective. If the
device is damaged or defective, replace the device immediately.
The device shall not be used by children without the supervision
of an adult. Children shall not play with the device.
Do not modify the device in any way.
Do not expose the device to water or moisture.
Do not expose the device to direct sunlight.
Keep the device away from heat sources.
Electrical safety
To reduce risk of electric shock, this product should only be
opened by an authorized technician when service is required.
Disconnect the product from the mains and other equipment if
a problem should occur.
Do not use the device if the mains cable or mains plug is
damaged or defective. If the mains cable or mains plug is
damaged or defective, it must be replaced by the manufacturer
or an authorised repair agent.
Before use, always check that the mains voltage is the same as
the voltage on the rating plate of the device.
Make sure that the mains cable cannot become entangled.
Make sure that the mains cable does not hang over the edge of
a worktop and cannot be caught accidentally or tripped over.
Warranty
Any changes and/or modications to the product will void the
warranty. We cannot accept any liability for damage caused by
incorrect use of the product.
Disposal
The product is designated for separate collection at an
appropriate collection point.
Do not dispose of the product with household waste.
For more information, contact the retailer or the local authority
responsible for waste management.
Documentation
The product has been manufactured and supplied in compliance
with all relevant regulations and directives, valid for all member
states of the European Union. The product complies with all
applicable specications and regulations in the country of sales.
Formal documentation is available upon request. The formal
documentation includes, but is not limited to the Declaration of
Conformity.
Disclaimer
Designs and specications are subject to change without notice. All
logos, brands and product names are trademarks or registered
trademarks of their respective holders and are hereby recognized as
such.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Konig Electronic SAS-ALARM240 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Konig Electronic SAS-ALARM240 in the language / languages: All languages as an attachment in your email.

The manual is 1,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info