288973
47
Zoom out
Zoom in
Previous page
1/50
Next page
8584
Images appear
with severe visual
noise.
Symptom Cause Remedy
Function
A strong magnet or
other electromagnetic
generator is located too
near the camera or
television set.
Move the camera away from
the magnet or
electromagnetic field.
Images do not
appear on the
television monitor.
The camera is not
correctly connected to
the television set.
Confirm your connections
are correct.
The video output mode
selected doesn’t match
that of the television
standard.
Set the video output
mode to match the
television standard
(page 67).
Play-
back
“Card Error”
appears in LCD
monitor.
The memory card
contains image data of
a non-compatible file
format.
View the images with a
computer.
The memory card
format is non-
compatible with the
camera.
Memory card is not
loaded correctly.
Remove the memory card
and reload it correctly.
“No Image” is
displayed on LCD
monitor.
Nothing is recorded on
the memory card.
Insert a memory card with
recorded image data.
“Card has not
been inserted” is
displayed on LCD
monitor.
Memory card is not
loaded.
Load memory card into
camera.
Symptom Cause Remedy
Function
Erasing
Image cannot be
erased
Image data was
recorded on a different
camera or device.
The image cannot be erased
normally by the camera. The
card can be reformatted to
erase all images.
The number of
images recordable
didn’t change
when an image
was erased.
The size of the erased
image file was very
small.
File size and number of
pictures recordable differ
depending on the image
quality mode and subject
conditions; not a malfunction.
Recharg-
ing
Can’t recharge
the camera.
No lithium ion battery
pack is loaded.
Insert the battery pack into
the camera.
Can’t recharge
the camera. Or it
is canceled
midway through.
Caution LED
flashes slowly.
Ambient temperature is
too high or too low,
causing the charger’s
protect circuits to
operate and interrupt
the recharging function.
Ambient temperature during
recharging should be
between +10°C and +30°C.
(In practice, a range of +5°C
- +40°C is possible, but the
recharging time may
become somewhat longer).
Nothing appears
on the LCD
monitor.
Battery power is
depleted, or no battery
pack is loaded.
Insert the lithium ion battery
pack into the camera and
recharge if necessary.
Nothing appears
on the LCD
monitor.
The auto-off function
has operated to turn
power off (page 60).
LCD doesn’t
appear.
Setting of power-save
function may cause
camera to enter sleep
mode when it is
inactive for set period.
Press shutter button halfway,
or press other function button
to return camera to normal
operating condition. Since
camera response differs
depending on the setting of
the Power-Save function,
consult p. 61 for details.
Record-
ing
Image cannot be
erased; “
mark appears.
The image is protected. Release the image protect
function (page 48).
Image cannot be
rotated or set for
DPOF.
The write protect
switch is set (SD
memory card).
Release the SD memory
card’s write protect lock
(page 11).
Play-
back
Other
Press the main power
switch again to turn power
ON.
名称未設定-1 2001.7.6, 7:03 PMPage 84-85 Adobe PageMaker 6.5J/PPC
47


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Konica revio kd 300 z at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Konica revio kd 300 z in the language / languages: English as an attachment in your email.

The manual is 3,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info