288973
46
Zoom out
Zoom in
Previous page
1/50
Next page
8382
Troubleshooting
“0” appears as the
number of images
recordable.
Symptom Cause Remedy
Function
The memory card has
insufficient free memory
available.
Insert a new memory card,
or erase unneeded images
on the current card.
The LCD monitor
displays “Card
has not been
inserted”
No memory card is
loaded.
Insert a memory card.
The LCD monitor
displays “Card
Error”.
The inserted memory
card has been formatted
on a different camera or
information device.
Reformat the memory card
on the camera (see page
57).
Record-
ing
“WRITE
PROTECT”
appears on the
LCD monitor.
The write protect
switch is activated (SD
memory card).
Release the write protect
switch, or insert a different
memory card.
Card access LED
flashes.
Image data is being
written to the memory
card.
Remove your finger from the
shutter release button and
wait for the flashing to stop.
Caution LED
flashes slowly.
The flash is charging.
Caution LED
flashes rapidly.
Camera shake warning,
indicating that a slow
shutter speed has been
selected.
Use a tripod or other means
to stabilize the camera.
The number of
images
recordable does
not change when
a picture is taken.
The file size of the
recorded image was
very small.
File size and number of
pictures recordable differ
depending on the image
quality setting and subject
conditions; not a
malfunction.
Green LED
flashes.
Focus is not locked on
subject (shutter will
operate).
Use the focus lock function
(page 41) to lock the focus
on a part of the subject with
higher contrast before final
composition of the image.
Focus mark
flashes.
Grasp the body of the adapter when connecting and
disconnecting it from a power outlet, and similarly grasp the
connector plug when connecting and disconnecting it from the
camera body. Pulling on the cords may cause internal breakage
of the wires, resulting in fire or electric shock.
If you observe any damage to the AC adapter, broken wires, or
faulty connector contacts, discontinue use and consult your
place of purchase or Konica Service Center as soon as possible.
CAUTION
Never use the AC adapter when it is incompletely connected to a
power outlet. Faulty contacts may cause abnormal heating, fire,
or electrical shock.
Do not tamper with the cord or subject it to excessive force, since
the cord may be damaged, resulting in fire or electrical shock. If the
cord is so damaged as to expose the wire core, discontinue use
immediately and consult your place of purchase or Konica Service
Center.
Due to the danger of electric shock, do not attempt to open the
AC adapter’s cover, or to disassemble, repair, or modify the
adapter.
Do not use the adapter when the plug is covered with dust, or do
not bring pieces of metal near it, since current may travel
through the dust and metal and cause a fire or electric shock. If
dust collects on the adapter plug, disconnect it from the
electrical outlet and clean away the dust before using.
If the adapter emits smoke or abnormal odors, or if you drop or
damage the adapter, discontinue use and consult your place of
purchase or Konica Service Center, since continued use may
result in fire hazard.
Do not connect the AC adapter to any source of power other
than a household AC outlet for which it is rated. Using the
adapter with other voltages or ratings may cause the hazard of
fire or electrical shock.
WARNING
* The SD logo is a registered trademark.
* QuickTime and the QuickTime logo are trademarks used under license.
QuickTime is a trademark registered in the United States and other countries.
* All brand and product names are the registered trademarks or trademarks of
their respective owners.
名称未設定-1 2001.7.6, 7:03 PMPage 82-83 Adobe PageMaker 6.5J/PPC
46


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Konica revio kd 300 z at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Konica revio kd 300 z in the language / languages: English as an attachment in your email.

The manual is 3,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info