780519
19
Zoom out
Zoom in
Previous page
1/45
Next page
KONA OWNER’S MANUAL
18
It is very important that you understand the type of
wheel-securing method on your bicycle, that you know
how to secure the wheels correctly, and that you know
how to apply the correct clamping force that safely
secures the wheel. Ask your dealer to instruct you in
correct wheel removal and installation, and ask them
to give you any available manufacturer’s instructions.
WARNING: Riding with an improperly secured
wheel can allow the wheel to wobble or fall off the
bicycle, which can cause serious injury or death.
Therefore, it is essential that you:
1. Ask your dealer to help you make sure you know
how to install and remove your wheels safely.
2. Understand and apply the correct technique for
clamping your wheel in place.
3. Each time, before you ride the bike, check that the
wheel is securely clamped.
The clamping action of a correctly secured wheel must
emboss the surfaces of the dropouts.
1. Front Wheel Secondary Retention Devices
Most bicycles have front forks that utilize a secondary
wheel retention device to reduce the risk of the wheel
disengaging from the fork if the wheel is incorrectly
secured. Secondary retention devices are not a substitute
for correctly securing your front wheel.
Secondary retention devices fall into two basic categories:
a. The clip-on type is a part which has been added to the
front wheel hub or front fork.
b. The integral type is molded, cast or machined into the
outer faces of the front fork dropouts.
Ask your dealer to explain the particular secondary reten-
tion device on your bike.
WARNING: Do not remove or disable the secondary
retention device. As its name implies, it serves as a
back-up for a critical adjustment. If the wheel is not
secured correctly, the secondary retention device can
reduce the risk of the wheel disengaging from the fork.
Removing or disabling the secondary retention device
may also void the warranty. Secondary retention
devices are not a substitute for correctly securing your
wheel. Failure to properly secure the wheel can cause
the wheel to wobble or disengage, which could cause
you to lose control and fall, resulting in serious injury
or death.
2. Wheels with Cam Action Systems
There are currently three types of over-center cam wheel
retention mechanisms: the traditional over-center cam
(g. 8a), and the cam-and-cup system (g. 8b), and
the threaded, through-bolt over center cam system (g.
8c). All three use an over-center cam action to clamp the
bike’s wheel in place. People also commonly refer to these
as quick-release axles. Your bicycle may use one of these
styles for the front wheel, and a different for the rear
wheel. 17
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kona 2022 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kona 2022 in the language / languages: English as an attachment in your email.

The manual is 2.06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info