780524
24
Zoom out
Zoom in
Previous page
1/42
Next page
KONA OWNER’S MANUAL
Shifting from an easier, “slower” gear (like 1) to a harder,
“faster” gear (like 2 or 3) is called an upshift. Shifting from
a harder, “faster” gear to an easier, “slower” gear is called
a downshift. It is not necessary to shift gears in sequence.
Instead, nd the “starting gear” for the conditions — a
gear which is hard enough for quick acceleration but easy
enough to let you start from a stop without wobbling —
and experiment with upshifting and downshifting to get
a feel for the different gears. At rst, practice shifting
where there are no obstacles, hazards or other trafc, until
you’ve built up your condence. Learn to anticipate the
need to shift, and shift to a lower gear before the hill gets
too steep. If you have difculties with shifting, the problem
could be mechanical adjustment. See your dealer for help.
c. What if it won’t shift gears?
If moving the shift control one click repeatedly fails to
result in a smooth shift to the next gear chances are that
the mechanism is out of adjustment. Take the bike to your
dealer to have it adjusted.
E) PEDALS
1. Toe Overlap is when your toe can touch the front wheel
when you turn the handlebars to steer while a pedal is in
the forwardmost position. This is common on small-framed
bicycles, and is avoided by keeping the inside pedal up and
the outside pedal down when turning. On any bicycle, this
technique will also prevent the inside pedal from striking
the ground in a turn. Note: Changing tire size or pedal
crank arm length affects toe overlap.
WARNING: Toe Overlap could cause you to lose control
and fall. Ask your dealer to help you determine if the
combination of frame size, crank arm length, pedal design
and shoes you will use results in pedal overlap. Whether
you have overlap or not, you must keep the inside pedal up
and the outside pedal down when making sharp turns.
25
Learn to anticipate the need to shift, and shift to a
lower gear before the hill gets too steep. If you have
difculties with shifting, the problem could be mechanical
adjustment. See your dealer for help.
WARNING: Never shift a derailleur onto the largest
or the smallest sprocket if the derailleur is not shifting
smoothly. The derailleur may be out of adjustment and
the chain could jam, causing you to lose control and fall.
E) What if it won’t shift gears?
If moving the shift control one click repeatedly fails to
result in a smooth shift to the next gear chances are that
the mechanism is out of adjustment. Take the bike to
your dealer to have it adjusted.
2. How an internal gear hub drivetrain works
If your bicycle has an internal gear hub drivetrain, the
gear changing mechanism will consist of:
a 3, 5, 7, 8, 12 speed or possibly an innitely variable
internal gear hub
• one, or sometimes two shifters
• one or two control cables
• one front sprocket called a chainring
• a drive chain
a. Shifting internal gear hub gears
Shifting with an internal gear hub drivetrain is simply a
matter of moving the shifter to the indicated position for
the desired gear ratio. After you have moved the shifter to
the gear position of your choice, ease the pressure on the
pedals for an instant to allow the hub to complete the shift.
b. Which gear should I be in?
The numerically lowest gear (1) is for the steepest hills.
The numerically largest gear is for the greatest speed.
24
2K17_Kona_Owners_Manual.indd 24 29.1.2016 15.27
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kona 2017 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kona 2017 in the language / languages: English as an attachment in your email.

The manual is 1.8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info