625968
199
Zoom out
Zoom in
Previous page
1/226
Next page
MAINTENANCE PROCEDURES
197
4.9.7 MAINTENANCE EVERY 2000 HOURS OF OPERATION
Carry out these operations together with those to be performed every 500 HOURS and every 1000 HOURS.
4.9.7.a CHANGING THE OIL IN THE HYDRAULIC TANK AND CLEANING THE FILTER
WARNING
q To carry out this maintenance operation it is necessary to tilt the cab floor. Carefully follow the
instructions given in paragraph "3.2.8 TILTING THE CAB FLOOR" or have this operation carried out by
your Komatsu Dealer.
q Retract the arm and bucket cylinders completely, rest the bucket teeth on the ground and, after stopping
the engine, eliminate the residual pressures from the equipment (by shifting the controls more than
once) and from the tank (by slowly loosening the filler cap).
q Soon after the machine has been stopped, the hydraulic oil is very hot and may cause burns; let it cool
down to 40÷45° C before carrying out this maintenance operation.
q Immediately clean any area dirty with oil.
q Oils, filters, the coolant and the battery are considered special waste and must be collected and
disposed of according to the regulations in force.
CAUTION
q On machines containing synthetic biodegradable hydraulic
oil type HEES, this must be changed after the first 500
hours of operation and successively every 2000 hours, and
in any case at least once a year.
1. Turn the turret so that the lower part of the hydraulic oil tank
is not covered by the tracks.
Retract the arm and bucket cylinders completely and lower the
boom until the bucket teeth rest on the ground.
3. Lower the blade to the ground.
4. Stop the engine and eliminate the residual pressure from the
work equipment (by shifting the controls more than once).
5. Shift the safety lever to the “locked” position (L).
6. Tilt the cab floor (see "3.2.8 TILTING THE CAB FLOOR").
RKA16440
199


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Komatsu Galeo PC14R-2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Komatsu Galeo PC14R-2 in the language / languages: English as an attachment in your email.

The manual is 6,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info