24
To re-install the canister, first align the notch of the canister with the hook on main body
and then press the canister onto main body. Make sure the locking hole on the clear
canister is secured with the locking button.
MAINTENANCE & STORAGE
NOTE:
- Battery discharges on its own during storage. Make sure to fully-charge the pool vacuum
before storage.
- You must re-charge the battery at least once every three months when it is not in use.
▪ Unplug the external adaptor from socket and then unplug the adapter jack
from the charging base.
▪ Detach accessories from the pool vacuum. If necessary, rinse the pool
vacuum and accessories with fresh water. DO NOT use detergent.
▪ Make sure to drain the water from the unit, handle and pole connector.
▪ Use a damp cloth to clean and dry the pool vacuum and its accessories.
▪ Store them in a well-ventilated area away from the sunlight, children,
heat, ignition sources, and pool chemicals. Ambient temperature for
storage should be 10˚C – 25˚C (50˚F – 77˚F). NOTE: A higher
temperature may reduce the battery life during storage.
WARNING!
- Never attempt in any way to disassemble the pool vacuum.
- Under no circumstances should you attempt to disassemble the pool vacuum and replace
the impeller, motor and battery by yourself.
