782606

Koenic KRVC 2320 RC Manual

24
Zoom out
Zoom in
Previous page
1/148
Next page
Size - A5
24
English
Fig. 17 Insert the water tank into the vacuum
robot.
For operation, follow the instructions in
the chapter Operating as a vacuum
cleaner. The robot will automatically
return to the charging base, after the
cleaning process has been finished, or
if the battery level is low. Note, that
the water tank has to be removed
immediately to avoid damages to the
flooring.
Note:
•In order to enhance the wet cleaning result,
it is advised to vacuum the area prior to
the wet cleaning, to remove dust and other
small residues.
•Wet the mop for before each use.
Attention
Water will start to drip out of the
attachment, as soon as the water tank has
been inserted. Start the cleaning process
immediately after inserting the water tank,
so avoid possible damages to the floor. Due
to the same reason, remove the water tank
directly after the cleaning process has ended.
Always supervise the product during the
cleaning, to prevent water damages to the
flooring, in case the robot should get stuck.
The supplier is not liable for damages, that
occur due to the negligence of all given
warnings and remarks concerning the usage
of the product as well as the cleaning of the
flooring.
Fig. 18 After swabbing, remove the water tank
with the mop cover.
Fig. 19 Open the rubber cap and pour
remaining water out of the tank.
Fig. 20 Remove the mop cover from the water
tank and wash it with a little detergent
and rinse it o. Wring the mop cover
slightly and let it dry.
Fig. 21 Attach the mop cover in the correct
position on the water tank. A
replacement mop cover is included.
Recommendations for a better
cleaning result
Vacuuming
• Before starting the vacuuming process,
remove all objects that stand/ lay on the
floor, which could interfere with the process
or in which the robot could get tangled up
(e.g. toys, carpets with longer cords etc.).
• Make sure that no objects hang down onto
the floor, in which the robot could get stuck
(e.g. power supply cables, curtains etc.).
• If possible, place chairs on the table during
the vacuuming process, in order to minimize
the number of obstacles on the floor.
• Block areas, in which the robot could get
stuck (e.g. closets with lowered boards,
tapered areas in between closets etc.).
• Make sure that all brushes can rotate freely
and aren’t blocked. Clean them if necessary.
• Empty the dust container.
Swabbing
• Observe all recommendations listed above.
• Have the robot vacuum the area before
swabbing, in order to reduce the amount of
dust on the floor.
• Soak the cleaning cloth under running water
and slightly wring it out, before attaching it
to the water tank, to enhance the cleaning
result and to achieve an equal distribution
of water onto the floor.
• If necessary, pause the swabbing process
and manually wring out the cleaning cloth,
removing bigger particles, before continuing
the process.
IM_KRVC2320RC_190807_V10_HR.indb 24 7/8/2019 14:43
… 24 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Koenic KRVC 2320 RC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Koenic KRVC 2320 RC in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish as an attachment in your email.

The manual is 9.54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info