Manual Koenic KFK 45412 E NF (page 22 of 155) (English, German, Dutch, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish)

782826

Zoom out

Zoom in

1/155

English

Setting the refrigerator temperature

Fig. 6Press the ZONE CHOICE button to

select the refrigerator mode, which

will be indicated by the respective

symbol. By pressing the button SET

TEMP. set the temperature from 2 to

8°C in 1°C steps. Note, that the energy

consumption will increase, the lower

the set temperature is.

ECO and SUPER modes

Fig. 7Press the ECO MODE button to

activate the energy saving mode,

which is indicated by the corresponding

symbol. In ECO mode, the temperature

of the refrigerator and freezer is

automatically set to 6°C and -17°C. The

temperatures are not adjustable in this

case. The device is operated with lower

energy consumption.

By pressing the button SUPER you

activate the SUPER mode which is

indicated by the corresponding symbol.

In SUPER mode, the temperature of

the freezer is automatically set to

-24°C. The temperature in the freezer

is quickly reduced. Use this mode, e.g.

if you want to freeze a large number

of foodstus, but consider, that the

energy consumption will be temporarily

increased.

The temperature of the refrigerator

remains unchanged and adjustable.

After 52 hours, the unit automatically

returns to the previous operating mode.

Fresh box compartment

Fig. 8Depending on the type of food to

be cooled, the temperature can be

adjusted.

Slide the slider to the left for fruits and

vegetables. Slide the slider to the right

for meat and ﬁsh. This cools the fresh box

compartment more.

Vegetable compartment Fruit &

Vegetables Box

The vegetable compartment has a slider for

moisture control. Slide the slider to the right to

increase the moisture. Slide the slider to the

left to open the vents to reduce moisture.

Adjust the sides of the doors

Note:

• If necessary, or if the premises require it,

the mounting of the doors can be changed.

To do this, follow below instructions in the

given order.

• The following tools are required:

hex-wrench 13 mm, wrench 8 and 10 mm,

phillips screwdriver. Due to the uniqueness

of the appropriate tools, those are not

mentioned separately in the following

instructions.

• For this work a dierent cover is needed,

which is provided with the unit.

• For safety, remove the door trays to

prevent them from being damaged.

Top door

1 Loosen and remove the screw in the upper

right plastic cap and remove the cap. Unplug

the connector at the right side. Unscrew

the upper hinge plate. When unscrewing,

be sure to hold the refrigerator door ﬁrmly,

otherwise it will be damaged.

2 Remove the cap on the left by pulling it o.

3 Pull out the door and place it on a soft and

clean surface.

4 Remove the screws, the stop bracket, and

the stop.

5 Take the stop bracket and the additionally

provided stop and screw them onto the left

side of the door.

6 Pry out the two caps on the top of the

refrigerator door and remove them.

IM_KFK 45412 E NF_201014_V10_HR.indb 22IM_KFK 45412 E NF_201014_V10_HR.indb 22 14/10/2020 5:26 PM14/10/2020 5:26 PM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Koenic KFK 45412 E NF in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish as an attachment in your email.

The manual is 6.42 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Koenic KFK 45412 E NF Manual

Product: